Advertisement
WARNING:/pci@#,#/FJSV,(e)ulsa@#(fjulsa#):
Resetting scsi bus, data overrun: got too much data from target (#,#)
A data overrun error was detected during target #,# control. The SCSI/SAS bus was reset. The SCSI/SAS unit and cable may
have a fault. Contact customer support.
WARNING:/pci@#,#/FJSV,(e)ulsa@#(fjulsa#):
SCSI bus parity error from target (%d,%d)
A SCSI/SAS bus parity error was detected during target #,# control. The SCSI/SAS unit and cable may have a fault. Contact
customer support.
WARNING:/pci@#,#/FJSV,(e)ulsa@#(fjulsa#):
Resetting scsi bus, protocol error occurred from target (#,#)
A protocol error was detected during target #,# control. The SCSI/SAS bus was reset. The SCSI/SAS unit and cable may
have a fault. Contact customer support.
WARNING:/pci@#,#/FJSV,(e)ulsa@#(fjulsa#):
invalid task termination interrupt
An invalid task termination interrupt was detected. Contact customer support.
WARNING:/pci@#,#/FJSV,(e)ulsa@#(fjulsa#):
Resetting scsi bus: IOC found SCSI bus error from target (#,#)
A SCSI/SAS bus error was detected during target #,# control. The SCSI/SAS bus was reset. The SCSI/SAS unit and cable
may have a fault. Contact customer support.
WARNING:/pci@#,#/FJSV,(e)ulsa@#(fjulsa#):
invalid count of terminated commands
The fjulsa driver's problem concerning SCSI/SAS bus reset processing. Contact customer support.
WARNING:/pci@#,#/FJSV,(e)ulsa@#(fjulsa#):
got unexpected EventNotification reply message
An unexpected EventNotification reply message was received. Contact customer support.
WARNING:/pci@#,#/FJSV,(e)ulsa@#(fjulsa#):
got unexpected EventAck reply message
An unexpected EventAck reply message was received. Contact customer support.
Advertisement
