Table of Contents
Advertisement
Audio Drivers and Applications Installation for Windows
Appendix C. Audio Drivers and Applications
After you've installed SiS chipset drivers, you will need to install the audio drivers. Step by step
instructions on how to do this are found in the following section.
Details of the Windows
manual. If you have any problems with Windows
or settings, please refer to your Windows
provided by Microsoft
Before you install the audio drivers and applications, please install the DirectX 8 first. The SD series
CD had included DirectX 8 under "Utility". Click the "Utility" button then you will see the "DirectX
8" button. Click it to start DirectX 8 installation, and the system will ask you to restart computer.
When you restart again, you can start to install the audio drivers and applications. Please check the
BIOS menu "Integrated Peripherals", item "Onboard Sound Controller", as this item need to be
set to "Enabled" before you can start to install the audio drivers and applications.
Insert the SD series CD into your CD-ROM drive, and it should execute the program automatically. If not,
you can go to the CD location and execute the execution file at the main directory of the CD. After it has
been executed you will see the screen below.
Step 1: Move the cursor to "5.1 Channel Audio
Driver" and click on it. You will go to the next
®
screen. (Windows
98 SE & Windows
Installation for Windows
®
Windows
®
98 SE or Windows
®
98 SE or Windows
®
Corporation.
®
2000)
®
98 SE & Windows
2000
Note
®
2000 operating system will not be mentioned in this
®
98 SE or Windows
®
2000 user's manual or other databases
Note
Step 2: The installation package select menu
shows up. Please choose which item you want to
install and click on it, and then you will go to the
next screen. The in the example here we've
choosen the item "Install Device Driver and
Applications". (Windows
2000)
®
2000
®
98 SE &
®
2000 installation, operations,
®
98 SE & Windows
User's Manual
C-1
®
Advertisement
Table of Contents
