Dontsendtraceevent() - LeCroy USB Protocol Suite Reference Manual

LeCroy Corporation
8.9

DontSendTraceEvent()

This function specifies that the event specified in this function should not be sent to a script.
Format:
DontSendTraceEvent (event)
Parameters:
event
Example:
...
SendTraceEvent(_PACKET); # Send all packets.
...
if(SomeCondition)
{
DontSendTraceEvent (_USB2_SOF);
DontSendTraceEvent (_USB2_SPLIT);
}
See SendTraceEvent() for all possible values.
# Don't send Start Of Frame packets.
# Don't send Split tokens.
Verification Script Engine Reference Manual
Page 44 of 107