Download Print this page

GE Wine Chiller Wine Reserve and Bevera Center Design Manual

Ge monogram wine chiller, wine reserve and beverage center installation instructions.
Hide thumbs

Advertisement

Installation
Instructions
If you have questions, call 800.626.2000 or visit our website at: www.monogram.com
Wine Chiller,
Wine Reserve
and
Beverage Center
Design Guide
With Installation Instructions

Advertisement

   Related Manuals for GE Wine Chiller Wine Reserve and Beverage Center

   Summary of Contents for GE Wine Chiller Wine Reserve and Beverage Center

  • Page 1: Installation Instructions

    Installation Instructions If you have questions, call 800.626.2000 or visit our website at: www.monogram.com Wine Chiller, Wine Reserve Beverage Center Design Guide With Installation Instructions...

  • Page 2: Table Of Contents

    BEFORE YOU BEGIN: Read these instructions completely and carefully. IMPORTANT – Save these instructions for local inspector’s use. IMPORTANT – Observe all governing codes and ordinances. Note to Installer – Be sure to leave these instructions with the Consumer. Note to Consumer –...

  • Page 3: The Installation Space

    THE INSTALLATION SPACE Locate Outlet 10-1/2" 24" 9" Max. 34-1/2"-35" 1-1/2" 23-3/4" Min. NOTE: Handle and handle standoff depth is 1-3/4″ The cutout depth should be 24″ The cutout dimensions shown allow for a full door swing and access to the pull-out racks when installed as a built-in in standard 24″...

  • Page 4: Tools, Hardware

    TOOLS REQUIRED • #2 Phillips screwdriver • Adjustable wrench PARTS SUPPLIED • Monogram nameplate • Hardware for changing door swing • Optional stainless steel toekick with screws and spacers • Left and right side hinge covers • Top screw hole cover GROUNDING THE WINE CHILLER, WINE RESERVE AND BEVERAGE CENTER...

  • Page 5: Step 2, Reverse Door Swing

    Installation Instructions STEP 2 REVERSE DOOR SWING SKIP THIS STEP IF DOOR SWING SUITS THE INSTALLATION Parts Included: • Top left case hinge • Bottom left case hinge • Left and right side decorative hinge cover • Decorative hinge screw hole cover ®...

  • Page 6: Step 3, Leveling

    Installation Instructions STEP 3 LEVEL • Use an adjustable wrench to turn the leveling legs and raise or lower the product. • Adjust carefully; the product should be level and plumb with cabinetry, and should align with adjacent toekick height. Turn Right to Lower Turn Left to Raise If you skipped Step 2:...

  • Page 8: Template For Nameplate

    TEMPLATE FOR NAMEPLATE LOCATION Upper Left Corner of Glass if Hinge is on Left Door Frame Side To position nameplate: • Cut template along dotted line. • Hold or tape template behind glass door so that it is visible from the front side.

This manual also for:

Wine reserve and beverage center

Comments to this Manuals

Symbols: 0
Latest comments: