Adjusting The Split Point - Kawai Concert Performer CP119 Quick Start Manual

Step 3
Play the keyboard.
The Acoustic Bass sound will be heard in the lower notes, while the Concert Grand and Warm Strings sounds will
continue to be heard simultaneously in the middle and upper notes.

ADJUSTING THE SPLIT POINT

The SPLIT POINT is used to set the length of the keyboard split by defining the position where the LEFT/SPLIT part
ends and where the RIGHT 1 and RIGHT 2 parts begin. The default SPLIT POINT is between keys F-2 and F#2.
LEFT/SPLIT section
Step 1
Press and hold the LEFT/SPLIT panel button.
Step 2
Press a key on the keyboard.
This key will be used as the new SPLIT POINT, defining the length of the LEFT/SPLIT part, and the RIGHT 1 and
RIGHT 2 parts.
It is also possible to increase or decrease the SPLIT POINT incrementally by touching the
on either side of the keyboard image shown in the bottom area of the display.
As we have seen, assigning instrument sounds to each part is a relatively simple process. Yet by activating and
deactivating the parts it is possible to create rich, complex voices, allowing up to three different instrument sounds to be
played simultaneously, across the keyboard.
Default SPLIT POINT
RIGHT 1 & RIGHT 2 section
Page
11
and symbols
2