Summary of Contents for Hammer S01
- Page 1 User Manual Dust collector Keep this manual handy and in good condition for continual reference! Dok.ID: 501-180-001_02 • Englisch • 2007-10-15...
- Page 2 A product of the FELDER GROUP HAMMER © FELDER Maschinenbau KR-Felder-Straße 1 A-6060 Hall in Tirol Tel.: +43 (0) 5223 45 0 90...
-
Page 3: Table Of Contents
Dust collector Table of contents Table of Contents General ........................... 4 Legend ......................4 Information about the manual ................4 Copyright......................4 Liability and warranty..................5 Warranty notice.....................5 Spare parts ....................5 Disposal .......................5 Safety ........................... 7 Intended use....................7 Manual contents ....................7 Making changes and modifications to the machine ..........7 Responsibilities of the owner operator...............8 What is required of personnel .................8 Work safety ....................8... -
Page 4: General
Dust collector General 1 General 1.1 Legend Important technical safety instructions in this manual are these particular cases, special attention must be paid in marked with symbols. order to avoid accidents, injury to persons or material These instructions for work safety must be followed. In all damage. -
Page 5: Liability And Warranty
Dust collector General 1.3 Liability and warranty The contents and instructions in this manual were com- scale. The actual delivery contents are dependent on piled in consideration of current regulations and state- custom-build specifications, add-on options or recent of-the-art technology as well as based on our know-how technical modifications and may therefore deviate from and experience acquired over many years. -
Page 6: Safety
2.1 Intended use The dust collector S01 is a dust and chip collecting unit etc. and all other materials which form part of the MAK- with a radial compressor and vacuums chips and dust List is prohibited. -
Page 7: Responsibilities Of The Owner Operator
Dust collector Safety 2.4 Responsibilities of the owner operator This manual must be kept in the immediate vicinity of cident prevention regulations, general safety regulations the machine and be accessible at all times to all persons as well as current environmental stipulations that apply to working on or with the machine. -
Page 8: Personal Safety
Dust collector Safety 2.7 Personal safety When working on or with the machine, the following must be strictly observed: Persons with long hair who are not wearing a hairnet are not permitted to work on or with the machine. It is prohibited to wear gloves while working on or with the machine. All jewellery (rings, bracelets, necklaces, etc.) must be removed before starting work on or with the machine. -
Page 9: Declaration Of Conformity
We hereby declare that the machine indicated below, which corresponds to the design and construction of the model we put on the market, conforms with the safety and health requirements as stated by the EC. Dust collector Product designation: HAMMER Make: Model designation: 98/37/EG... -
Page 10: Specifications
Dust collector Specifications 4 Specifications 4.1 Dimensions and weight Basic extractor Length A ca. 720 mm Width B ca. 380 mm Height C (incl Filter) ca. 1670 mm Weight 25 kg Motor power 0,75, 1x220 V, 50 Hz Connection-Ø 100 mm Chip bag contents 100 l Volume flow max. -
Page 11: Construction
Dust collector Construction 5 Construction 5.1 Overview Base " Collector body Handle bar Collector casters Filter bag Order no.: 02.1.127 & Chip bag Order no.: 02.2.013 - 10 pcs. Hose connection Ø 100 mm " & Fig. 2: Overview... -
Page 12: Transport, Packaging And Storage
Dust collector Transport, packaging and storage 6 Transport, packaging and storage 6.1 Safety instructions Warning! Risk of injury: There is a risk of injury due to falling parts while transporting, loading or unloa- ding the machine. Attention! Risk of material damage: The machine can be damaged or destroyed if it is subjected to impro- per handling during transport. -
Page 13: Packaging
Dust collector Transport, packaging and storage 6.4 Packaging If no agreement has been made with the supplier to take back the packaging materials, help to protect the environment by reusing the materials or separating them according to type and size for recycling. Attention! Dispose of the packaging materials in an environmentally friendly way and always in ac- cordance with local waste disposal regulations. -
Page 14: Setup And Installation
Dust collector Setup and installation 7 Setup and installation 7.1 Safety instructions Warning! Risk of injury: Improper assembly and installation can lead to serious physical injury or equip- ment damage. For this reason, this work may only be carried out by authorised, trained personnel who are familiar with how to operate the machine and in strict observance of all safety instructions. -
Page 15: Machine Assembly
Dust collector Setup and installation 7.3 Machine assembly Rolling carriage: Turn the base plate upside-down and mount the Rollers to " the base plate using the socket head cap screws screws (M5x8 mm) and shims as shown. Socket head cap screws M5x8mm "... - Page 16 Dust collector Setup and installation Assembling casters to the Filter body: Screw the two short casters with the plastic brackets to the filter body using the screws (M8x45 mm), shims and nuts as shown. Collector casters - short " " Plastic brackets Screws M8x45 mm Shims...
-
Page 17: Electrical Connection
Dust collector Setup and installation Assembling the filter bag: 1. Thread the ratchet strap into the filter bag. " 2. Place the filter bag over the filter bag support. The filter is tightened over the blower body using the ratchet strap. 3. -
Page 18: Circuit Diagram
Dust collector Setup and installation 7.5 Circuit diagram 4A, gl Fuse 3 x 1.0 mm 0,55 Kw 50 Hz 220 / 240 V 3,3 A Full load Fig. 12: Circuit diagram 7.6 Switching on and off The dust collector is equipped with an on/off switch. turn the dust collector on, open the switch cover first. -
Page 19: Maintenance
Dust collector Maintenance 8 Maintenance 8.1 Safety instructions Warning! Risk of injury: improper maintenance can cause serious injury or damage. For this reason, this work may only be carried out by authorised, trained personnel who are familiar with how to operate the machine and in strict observance of all safety instructions. -
Page 20: Spare Parts
Dust collector Spare parts 9 Spare parts 12 13 Fig. 14: Spare parts Item Designation Pcs. Dust collector Filter bag support Set of screws Ratchet strap - Filter bag Ratchet strap - Chip bag Base Filter body Chip bag Filter bag Seal Steering rollers Plastic brackets- Filter body... -
Page 21: Transport Inspection
Dust collector Index 10 Index Copyright, 4 Transport, 12 Transport inspection, 12 Dangers, 8 Declaration of Conformity, 9 Warranty, 5 Dimensions, 10 Warranty notice, 5 Work safety, 7 Electrical connection, 17 Explanations of the symbols, 4 Intended use, 6 Information about the manual, 4 Installation, 14 Liability, 5 Manual contents, 6... - Page 24 KR-Felder-Straße 1 A-6060 Hall in Tirol Tel.: +43 (0) 5223 / 45 0 90 Fax: +43 (0) 5223 / 45 0 99 Email: info@felder.at Internet: www.felder.at...