Wi-Fi Connection - Nokia N97 mini User Manual

An active high-speed downlink packet access (HSDPA)
connection (network service) is indicated with
Select from the following:
Network mode — Select which network to use. If you select
Dual mode, the device uses the GSM or UMTS network
automatically, according to the network parameters and the
roaming agreements between the wireless service providers.
For details and roaming costs, contact your network service
provider. This option is shown only if supported by the
wireless service provider.
A roaming agreement is an agreement between two or more
service providers to enable the users of one service provider
to use the services of other service providers.
Operator selection — Select
search for and select one of the available networks, or
Manual to manually select the network from a list. If the
connection to the manually selected network is lost, the
device sounds an error tone and asks you to reselect a
network. The selected network must have a roaming
agreement with your home network.
Cell info display — Set the device to indicate when it is used
in a cellular network based on microcellular network (MCN)
technology and to activate cell info reception.

Wi-Fi connection

Your device can detect and connect to wireless local area
networks (Wi-Fi). Using a Wi-Fi, you can connect your device
to the internet and compatible devices that have Wi-Fi
support.
© 2011 Nokia. All rights reserved.
.
Automatic to set the device to
About Wi-Fi
To use a Wi-Fi connection, it must be available in the location,
and your device must be connected to Wi-Fi. Some Wi-Fi
networks are protected, and you need an access key from the
service provider to connect to them.
Note: In France, you are only allowed to use Wi-Fi indoors.
Features that use Wi-Fi, or that are allowed to run in the
background while using other features, increase the demand
on battery power and reduce the battery life.
Important: Always enable one of the available encryption
methods to increase the security of your wireless LAN
connection. Using encryption reduces the risk of
unauthorized access to your data.
Wi-Fi connections
To use a wireless LAN (Wi-Fi) connection, you must create an
internet access point (IAP) for Wi-Fi. Use the access point for
applications that need to connect to the internet.
A Wi-Fi connection is established when you create a data
connection using a Wi-Fi internet access point. The active Wi-
Fi connection ends when you end the data connection.
You can use Wi-Fi during a voice call or when packet data is
active. You can only be connected to one Wi-Fi access point
device at a time, but several applications can use the same
internet access point.
When the device is in the offline profile, you can still use Wi-
Fi (if available). Remember to comply with any applicable
51