Initial Settings Menu; Using The Initial Settings Menu; Video Output Settings - Pioneer XV-DV232 Operating Instructions Manual

Initial Settings menu

Chapter 6
Initial Settings menu

Using the Initial Settings menu

The Initial Settings menu provides audio and
video output settings, parental lock settings,
and display settings, among others.
If an option is grayed out it means that it
cannot be changed at the current time. This is
usually because a disc is playing. Stop the
disc, then change the setting.

Video Output settings

Setting
TV Screen
(See also Screen sizes
and disc formats on
page 36.)
AV Connector Out
U.K. model only
(See Using the SCART
AV output on page 29.)
Component Out
Australian model only
(See also Connecting
using the component
video output on
page 28.)
S-Video Out
Australian model only
(See also Connecting
the S-video output on
page 27.)
Note
1 • In the table, the default setting is shown in bold: other settings are shown in italics.
• Some settings, such as TV Screen, Audio Language and Subtitle Language may be overridden by the DVD disc. Often
these settings can also be made from the DVD disc menu.
• U.K. model only – The AV Connector Out setting only needs to be set if you have connected this player to your TV using a
SCART cable.
Option
4:3 (Letter Box)
4:3 (Pan & Scan)
16:9 (Wide)
Video
S-Video
RGB
Interlace
Progressive
S2
1 Press HOME MENU and select 'Initial
Settings'.
2 Use the cursor buttons and ENTER to
select the setting and option you want to set.
All the settings and options are explained on
the following pages.
What it means
Set if you have a conventional 4:3 TV. Widescreen movies are
shown with black bars top and bottom.
Set if you have a conventional 4:3 TV. Widescreen movies are
shown with the sides cropped so that the image fills the screen.
Set if you have a widescreen TV.
Standard video, compatible with all TVs.
Higher quality, but check your TV for compatibility.
Best quality, but check your TV for compatibility.
Set if your TV is not compatible with progressive scan video.
Set if your TV is compatible with progressive scan video (see
your TV's instruction manual for details). Press ENTER once
more to confirm (or RETURN to cancel).
Note that progressive scan video is only output from the
component video jacks.
Standard setting.
Initial Settings
1
06
21
En