Table of Contents
Advertisement
Installing the UIM Card（Optional）and Battery
Consult the network operator if a UIM card is needed.
Make sure that the golden area on the UIM card is facing
downwards and the cut-off edge is correctly fit to that of the
card holder.
Charging the Battery
Connect the cordless phone to the charger stand.
1.
Connect one power adapter connector to the charger stand.
2.
Connect the charger to an AC power socket. During the
3.
charging, the animation of charging icon is displayed.
When the charging icon becomes static, the cordless phone
4.
is fully charged.
When the cordless phone is fully charged, disconnect the
5.
charger from the AC power socket first. Then disconnect the
charger stand from the charger.
Note:
Remove the battery if the cordless phone is left
unused for a long period.
If the battery has not been used for a long time or
the battery is exhausted, the screen of the
cordless phone may not function when you charge
the battery again. This is normal. After the battery
is being charged for a while, you can power on the
cordless phone for use.
4
Advertisement
Table of Contents
