Related information
•
Changing wheels - fitting (p. 315)
•
Jack* (p. 309)
•
Warning triangle (p. 317)
•
Wheel bolts (p. 308)
Changing wheels - fitting
It is important that the procedure for fitting
the wheel is carried out correctly.
Fitting
1. Clean the contact surfaces between
wheel and hub.
2. Put on the wheel. Tighten the wheel bolts
thoroughly.
3. Lower the car so that the wheels cannot
rotate.
4. Tighten the wheel bolts crosswise. It is
important that the wheel bolts are tight-
ened properly. Tighten to 140 Nm. Check
the torque with a torque wrench.
09 Wheels and tyres
The white arrow must point toward the front of
the car.
5. Screw apart the towing eye and wheel
bolt wrench. Place the wheel bolt wrench
and the jack in their respective compart-
ments in the bag. Tighten the bag's cen-
tre strap firmly and use the other strap to
secure the bag in the rear load retaining
eyelet on the left-hand side of the cargo
area. Position the bag so it is not pinched
when the tailgate is closed. The white
arrow on the bag must point toward the
front of the car.
*
Option/accessory, for more information, see Introduction.
09
315