Download Print this page

LOUD Technologies FRS series Specifications

Advertisement

Quick Links

Appendix C: Technical Info

Specifications

Continuous Sine Wave Average Output Power, per channel,
both channels driven, 0 Hz to 0 kHz
FRS•1300
2 ohms: 650 W
4 ohms: 420 W
8 ohms: 235 W
Bridged Mono Operation, 0 Hz to 0 kHz
FRS•1300
4 ohms: 1300 W
8 ohms: 840 W
Note: Power ratings are specified at 240 VAC line voltage.
Power Bandwidth
5 Hz to 50 kHz (+0, –3 dB)
Frequency Response
20 Hz to 25 kHz (+0, –1 dB)
Distortion
THD and SMPTE IMD; 20 Hz to 20 kHz
< 0.03 % @ 8 ohms
Signal-to-Noise Ratio
> 105 dB below rated power into 4 ohms
Channel Separation
> 68 dB @ 1 kHz
Damping Factor
> 300 @ 1 kHz and below, into 8 ohms
Input Impedance
20 kΩ balanced
10 kΩ unbalanced
Input Sensitivity
1.15 V (+3.4 dBu) for rated power into 4 ohms
Gain
FRS•1300:
FRS•1700:
FRS•2800:
Maximum Input Level
9.75 Vrms (+22 dBu)
Turn On Delay
2.5 seconds
Subsonic Filter
– 9 dB @ 30 Hz
1
FRS SERIES AMPLIFIERS
FRS•1700
FRS•2800
830 W
1300 W
540 W
850 W
310 W
500 W
FRS•1700
FRS•2800
1660 W
2800 W
1080 W
1700 W
32 dB
33 dB
35 dB
Topology
FRS•1300, FRS•1700: Class AB
FRS•2800:
Class H
Cooling
Variable-speed fans with back-to-front airflow
Indicators
SIG (Signal Present) on each channel
OL (Overload) on each channel
Signal Meters –3 dB, –6 dB, –9 dB. –20 dB on each channel
Power LED on power switch
Current Consumption (measured at 0 VAC line voltage)
FRS•1300
Idle
0.4 A
Musical Program:
@ 8 ohms
4.0 A
@ 4 ohms
6.0 A
@ 2 ohms
8.2 A
AC Power Requirements
U.S. model:
100–120 VAC, 50–60 Hz
European model:
200–240 VAC, 50–60 Hz
Physical Dimensions and Weight
Height:
3.50 in/ 89 mm
Width:
19.00 in/ 483 mm
Depth:
14.65 in/ 372 mm
Depth with Handles:
16.15 in/ 410 mm
Weight:
FRS•1300:
21.0 lb./ 9.5 kg
FRS•1700:
21.5 lb./ 9.7 kg
FRS•2800:
22.0 lb./ 10.0 kg
Flavor:
Slightly minty
LOUD Technologies Inc. is always boldly striving to improve
our products by incorporating new and improved materi-
als, components, and manufacturing methods. Therefore, we
reserve the right to change these specifications at any time
without notice.
"Mackie," and the "Running Man" are registered trademarks of
LOUD Technologies Inc. All other brand names mentioned are
trademarks or registered trademarks of their respective hold-
ers, and are hereby acknowledged.
©2007-2008 LOUD Technologies Inc. All Rights Reserved.
FRS•1700
FRS•2800
0.5 A
0.6 A
5.3 A
8.4 A
7.4 A
10.8 A
11.4 A
18.3 A

Advertisement

loading

Summary of Contents for LOUD Technologies FRS series

  • Page 1: Specifications

    1.15 V (+3.4 dBu) for rated power into 4 ohms Flavor: Slightly minty Gain FRS•1300: 32 dB LOUD Technologies Inc. is always boldly striving to improve FRS•1700: 33 dB our products by incorporating new and improved materi- FRS•2800: 35 dB als, components, and manufacturing methods.
  • Page 2: Block Diagram

    Block Diagram Owner’s Manual...
  • Page 3 21 lbs. (9.5 kg) FRS•1700 WEIGHT 21.5 lbs. (9.7 kg) FRS•2800 WEIGHT 22 lbs. (10 kg) 1.50 in/ 38 mm • 2800 FAST RECOVERY POWER AMPLIFIER 19.0 in/ 483 mm 14.65 in/ 372 mm 1.50 in/ 38 mm FRS SERIES AMPLIFIERS...

This manual is also suitable for:

Frs-1300Frs-1700Frs-2800