Inserting The Battery Pack And Memory Card - Canon SX170 8410B001 User Manual

Table of Contents

Advertisement

To protect the battery pack and keep it in optimal condition, do not
charge it continuously for more than 24 hours.
For battery chargers that use a power cord, do not attach the
charger or cord to other objects. Doing so could result in malfunction
or damage to the product.
For details on charging time and the number of shots and recording time
possible with a fully charged battery pack, see "Number of Shots/Recording
Time, Playback Time"
(=
129).
Charged battery packs gradually lose their charge, even when they are not
used. Charge the battery pack on (or immediately before) the day of use.
The charger can be used in areas with 100 – 240 V AC power (50/60 Hz). For
power outlets in a different format, use a commercially available adapter for
the plug. Never use an electrical transformer designed for traveling, which may
damage the battery pack.

Inserting the Battery Pack and Memory Card

Insert the included battery pack and a memory card (sold separately).
Note that before using a new memory card (or a memory card formatted in
another device), you should format the memory card with this camera
1
Check the card's write-protect tab.
z
z
Recording is not possible on memory cards
with a write-protect tab when the tab is in the
locked (downward) position. Slide the tab up
until it clicks into the unlocked position.
2
Open the cover.
z
z
Slide the cover ( ) and open it ( ).
Terminals
Battery
Lock
(=
91).
For guidelines on how many shots or hours of recording can be saved on one
memory card, see "Number of 4:3 Shots per Memory Card"
3
Insert the battery pack.
z
z
While pressing the battery lock in the
direction of the arrow, insert the battery
pack as shown and push it in until it clicks
into the locked position.
z
z
If you insert the battery pack facing the
wrong way, it cannot be locked into the
correct position. Always confirm that the
battery pack is facing the right way and
locks when inserted.
4
Insert the memory card.
z
z
Insert the memory card facing as shown
until it clicks into the locked position.
z
z
Make sure the memory card is facing the
right way when you insert it. Inserting
memory cards facing the wrong way may
damage the camera.
Label
5
Close the cover.
z
z
Lower the cover ( ) and hold it down as
you slide it, until it clicks into the closed
position ( ).
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting
Modes
4
P Mode
5
Tv, Av, and M
Mode
6
Playback Mode
7
Setting Menu
8
Accessories
9
Appendix
Index
(=
129).
13

Advertisement

Table of Contents
loading

This manual is also suitable for:

Powershot sx170 is

Table of Contents