Sequencer Control - Propellerhead Polar Operation Manual

Connections
Remember that CV connections will not be stored in the Polar patch!
!

Sequencer Control

The Sequencer Control CV and Gate inputs allow you to control Polar from another CV/Gate device (typically a Ma-
trix or an RPG-8).
Gate
The signal to the Gate input delivers note on/off.
CV
The signal to the CV input controls the pitch shift of Pitch Shifter 1 and 2 chromatically. This means you can "play" the
pitch shift with Note CV signals from other devices. The control signal modulate Pitch Shifter 1 and 2 together, in a
monophonic fashion, so that the pitch shift relationship is always maintained.
Gate Input
Lock Delay Buffer
A Gate signal on this input activates the Lock function, see "Lock (Buffer)".
24
POLAR DUAL PITCH SHIFTER