usiNg the remote coNtrol
This page explains how to use the C24 remote control to
operate the NP30, and how to fit the batteries into the remote
control.
f i t t i N g t h e b a t t e r i e s
Before using the remote control you need to insert
the two button cells supplied with the C24.
•
Open the cover on the back of the remote
control by pressing the tab gently:
•
Insert the two batteries, positive side uppermost:
•
Replace the cover and push until it clips into place.
Note: Replace only with 3V button cells
type CR2025 or equivalent.
When disposing of old batteries please be considerate
to the environment.
Decrease the volume (NP30)
Select NP30/DAC30 mode
Increase volume of amplifier
Decrease volume of amplifier
Configuration options (NP30)
N P 3 0 u s e r g u i d e
Switch on/off
Select a source
Select next source or
configuration option
Increase the volume (NP30)
Select previous source or
configuration option
Configuration options (NP30)
5