Download Print this page
Kogan KAINVPS1KWA User Manual
Kogan KAINVPS1KWA User Manual

Kogan KAINVPS1KWA User Manual

1000w pure sine wave inverter

Advertisement

Quick Links

Advertisement

loading

Summary of Contents for Kogan KAINVPS1KWA

  • Page 2 Please don't arbitrarily replace the unit's connection-cable the power cord. If you experience • any issues with the unit while it is under warranty, please contact the Kogan customer support team. Please use this product between the temperatures of -20ºC to 50ºC. Do not use it under •...
  • Page 3 Appearance and Description Picture 1 Picture 2...
  • Page 4 Operation Instruction: Connect the storage battery with the power inverter & battery charge: Connect the positive terminal (red terminal) of the storage battery with the positive terminal (red terminal) of the inverter, using the red cable. Then connect the negative terminal (black terminal) of the storage battery with the negative terminal (black terminal) of the inverter using the black cable.
  • Page 5: Function Introduction

    Function Introduction Inverter output function: Open the switch of the front panel, the inverter will convert the battery's DC power to pure sine wave AC, output from the AC outlet on the rear panel. Over-voltage protection function: When the battery voltage is higher than the set value, the device will automatically cut off the inverter output when the front panel LED will flash 3 times per second and the buzzer alarm will sound.
  • Page 6 Overload Protection: When the load is over the rated power, the buzzer will sound after 3 to 5 seconds, and the green LED light will flash quickly. The power inverter will cut off automatically to protect the inverter. Short-circuit Protection: When the load is more than 2 times the rated power or the unit is in short circuit, the buzzer will sound after 1-2 seconds and the green LED light will flash quickly.
  • Page 7 You can calculate the storage battery's used time by this formula: Battery capability (AH) --------------------------------------------------------- x 80% = Usage Time (Hours) Load general power + DC Input Voltage ATTENTION The use time of the storage battery is determined by the quality of the storage battery and how long it has been since the battery was purchased.
  • Page 8 Usage Precautions! Note: the red and black terminal points MUST be tightened! Ensure the unit has adequate ventilation. Keep at least 30cm between the unit and any walls or other circulation blocking objects.
  • Page 9 Do not leave the unit operating without being present. There are NO user serviceable parts inside the inverter. Repair work or alterations carried out by non-professional persons and/or Kogan technicians is strictly prohibited and will result in the warranty being void.