Ecotec EAS SERIES Installation & User Manual

INSTALLATION & USER MANUAL
EAS SERIES
for Space heating
Installation and maintenance guide
System description..........................................
Declaration of conformity.................................
Installation details..........................................
Safety precautions ..........................................
Transportation & storage.................................
Before starting installation...............................
Installation sequence .....................................
Inspection of installation .................................
Locating the heat pump.................................
Protection ......................................................
Ventilation......................................................
Drainage.........................................................
Placement checklist..........................................
Radiator heating system....................................
In-floor heating system.....................................
Connecting the heat pump................................
Flushing the heating system..............................
Connecting to heating system...........................
Commissioning the heat pump..........................
Operating temperatures....................................
Maintenance......................................................
Technical specifications EAS 700/1000..........
Technical specifications EAS 1500/2500........
Tips to Increase savings...................................
Wiring diagram................................................
Replacement parts list......................................
Troubleshooting guide.................................
and cooling
10
11
12
13
13
14
© Ecotec Heat Pumps Ltd | Installation Manual & User Guide 1
2
This manual is designed to provide the
2
information necessary to correctly install and
3 operate the Heat Pump.
The guide lists topics in the order that we, as
3
manufacturers, recommend all installations and
3
commissioning should be carried out.
3
3
All Ecotec Heat Pumps must be installed by a
3
licensed, authorised or qualified heat pump
installer. The Installer should be familiar with
4
local building regulations, exacting Health and
4
Safety Regulations and building control
4
requirements where appropriate.
4
4
There are no refrigeration connections or
refrigerant requirements since all Ecotec units
5
come pre-charged from factory and are leak
6
tested prior to delivery.
7
Copyright © Ecotec Heat Pumps Ltd - E&OE
7
7
8
8
9