Playing Music Through Wi-Fi; Playing Music Through Airplay; Playing Music Through An Auxiliary Device; Connecting Through Dlna - Harman Kardon Onyx Owner's Manual

Onyx

Playing Music through Wi-Fi

To play music in your Onyx through Wi-Fi:
1. Press the Power button. The LED will illuminate white.
2. Connect to your Wi-Fi network by following the above procedures.
3. If Harman Kardon Onyx is on Wi-Fi network, the
Wi-Fi LED becomes constant white.
4. Control playback from your Wi-Fi enabled device.
Playing Music through AirPlay®
®
AirPlay allows you to wirelessly stream audio content from your your Mac or PC,
iPhone, iPad or iPod touch to Harman Kardon Onyx.
• iPhone, iPod touch, or iPad (running iOS version 4.2 or higher)
• MAC or PC running a compatible version of iTunes

Playing Music through an Auxiliary Device

1. Connect the auxiliary device to the Aux-in jack using
a stereo 3.5mm (1/8" auxiliary cable).
2. Press the Power button on top panel of the unit.
3. Control music playback through the auxiliary device.

Connecting through DLNA

DLNA in the HK Onyx helps in sharing audio data over a home network and stream
audio.
LED
Power LED
Wi-Fi LED
Bluetooth LED
Grouped LEDs
All LEDs
Volume +/- LED
State
White, Constant
Amber, Constant
Amber, Regular Flash
White, Flash Twice
OFF
White, Constant
White, Regular Flash
White, Flash Twice
White, Quick Flash
Amber, Constant
Amber, Quick Flash
Amber, Double Quick Flash,
White, Constant
White, Slow Flash
White, Constant
White, Left to Right Rolling
White, Constant Last one, Slow Flash
OFF
White, Constant for 2 seconds
White, Regular Flash
White, Constant for 5 seconds

H/K Remote

HK Onyx can be operated through the H/K Remote app available in the App Store for
Apple products or Google Play for Android products. You can use the H/K Remote app to
stream music to, and control the HK Onyx through your smart phone or tablet.

LED Indications

The LEDs present on the top panel of HK Onyx indicates the status of the speaker unit.
Refer the table below to get a fair idea on the speaker LED indications.
Operational mode
Sleep mode
Low battery in Operational or Sleep mode
Factory settings restored
OFF mode
Wi-Fi connected (Including connected in Ad-hoc mode)
Wi-Fi connecting
Wi-Fi info sharing
Waiting connecting in Ad-hoc mode
Wi-Fi connection failed
WPS PBC mode
WPS PIN mode
Bluetooth connected
No Bluetooth device connected
Battery level or volume level
Upgrading
Charging per battery levels
Charge complete or no charge.
Power ON/OFF
Upgrade Failed
Volume change or volume slider/button is touched
Operation
Indication
7