Advertisement
toggle between the "Mute" and "Operate" condition. When muted, a red glow will be
observed in the LED. On occasion the preamplifier may seem not to have responded to a turn
of the "Mute" knob; this is due to "contact bounce" in the switch. Simply turn the knob again
until the desired condition is attained.
STANDARD PREAMPLIFIERS WITH REMOTE CONTROL
The optional remote control allows for wireless adjustment of "Mute" and "Volume".
The remote wand is powered by two "AAA" batteries. These should be of the alkaline type.
You will need to install them in the wand before using the remote. Since batteries can leak,
they should be removed from the wand if it is not going to be used for an extended period
of time.
Volume Up/Down: These buttons cause a motor to turn the volume control. Motorized
controls offer superior sound, as well as direct visual indication of volume setting. The front
panel control may also be used directly in the conventional way.
Mute: Pressing either side of the "Mute" button will toggle between the "Mute" and
"Operate" condition. When muted, a red glow will be observed in the LED indicator. Mute
is automatically engaged when switching on units equipped with the remote control option.
OBTAINING THE BEST PERFORMANCE
Precautions: Before removing cover, mute the preamplifier, turn power switch to "off"
position, disconnect the AC power cord from the wall, remove all interconnects, and wait 15
minutes. FOLLOWING THESE STEPS IS IMPORTANT TO PROTECT YOUR SAFETY.
To prevent loss, place cover screws in a small receptacle. To avoid the risk of shock or other
injury, reinstall cover before reconnecting the system or turning the unit on.
Page 6
Advertisement
