Reverb; Record; Playback - Pyle PTED01 Manual

Reverb

Press [ reverb ] button to enter reverb function. In this
menu, the digit on far left of LED will display letter ' R ' .
The two digits on the right will display current reverb level.
The button select [+] / [ ] -
the reverb level (0-3, not loop). This value will be auto-
saved after adjusted.

Record

Prepare to Record
Select the desired song, drum kit, tempo, drum off setting,
and reverb settings.
Start Recording
Press the [rec] button, the light start flashing.
Press the [start/stop] button or strike the pad, the light stop
flashing and the recording process starts.
Stop Recording
To stop recording, press the [start / stop] button or [ rec ]
button. The record indicator will turn off. If the memory is
full, "FL" will appear on the display and recording process
stops automatically.
Note: When you start the recording, the vocal metronome also
starts to count. But the sound of the vocal will not be record.
To stop the metronome, press the [click] button.

Playback

Press the [play/stop] button will start or stop playing
recorded song.
Note: When you record a new song, it will replace the previous
recording.
The song data recorded will be lost when you turn off the power.
or [dial] can be used to adjust
11