Using A Stereo Signal Processor With Two Amps; Using A Stereo Signal Processor With A Stereo Power Amp - Rivera Knucklehead Reverb KR 55T Owner's Manual

Using a Stereo Signal Processor with Two Amps

MASTER
PLUG YOUR GUITAR HERE
EFFECTS LOOP
SEND
LEVEL
SEND RETURN
Z OUT Z IN
560 Ω 250K Ω
Using shielded cords, connect the Effects Loop Send of the Master Amp to the
processor's input, and one of the processor's outputs to the Effects Loop Return of the
master amp. Connect the other one of the Processor's outputs to the Effects Return of
the slave amp. Adjust the mixture of effect/non-effect sounds at the signal processor,
and set the levels at the amp and processor for lowest distortion. If you use multiple
signal processors, connect them in series (processor 1's output to processor 2's input,
etc.). Since the slave amp has NO dry sound, adjust the Loop Blend on both amps to
10, and adjust the blend using the controls on the effect.

Using a Stereo Signal Processor with a Stereo Power Amp

SEND
100W. RMS
LEVEL
SPEAKER JACKS
IN PARALLEL
SPEAKER 2 SPEAKER 1
USE FIRST
TO
CENTER
CABINET
This configuration produces a three amp sound. The Master amp has the subwoofer
and produces a Mono sound with reverb but without effects. The Stereo Power Amp
provides the stereo part of the sound. Using shielded cords, connect the Effects Loop
Send of the Master Amp to the processor's input, and both of the processor's outputs to
the Line Inputs of the Stereo Power Amp. Adjust the mixture of effect/non-effect sounds
at the signal processor, and set the levels at the amp and processor for lowest
distortion. If you use multiple signal processors, connect them in series (processor 1's
output to processor 2's input, etc.).
RETURN LOOP BLEND
SUB OUTPUT
LEVEL
Z OUT
PUSH LOOP 560 Ω
TO SUBWOOFER
MASTER
PLUG YOUR GUITAR HERE
EFFECTS LOOP RETURN LOOP BLEND
LEVEL
SEND RETURN
Z OUT Z IN
560 Ω 250K Ω
PUSH LOOP
Knucklehead Reverb 1.0 p 29
STEREO EFFECT
LEFT
RIGHT INPUT
OUTPUT
OUTPUT
STEREO EFFECT
LINE OUTPUTS
SUB OUTPUT INPUT
LEFT RIGHT
Z OUT
560 Ω
TO SUBWOOFER
SLAVE
EFFECTS LOOP RETURN LOOP BLEND
LEVEL
SEND RETURN
Z OUT Z IN
560 Ω 250K Ω
PUSH LOOP
STEREO POWER AMP
LINE INPUTS SPEAKER OUTPUTS
LEFT RIGHT LEFT RIGHT
TO LEFT
AND RIGHT
CABINETS