Household Type Owner’s Guide Model 106766 For Customer Assistance Please Call: 1-877-207-0923 Part No. 71937 (2/02) Important Safeguards ... 2 Service Information ... 4 Assembly ... 5-7 Thermal Cut Off ... 4 Accessories ... 7 Dust Bag ... 8 Filters ... 9 Brush Roll ...
To reduce the risk of fire, electric shock, or injury. • Do not use outdoors or on wet surfaces. • Do not leave vacuum cleaner when plugged in. Turn off the switch and unplug the electrical cord when not in use and before servicing.
Serial No._____________________________________ Automatic Motor Shut-Off To protect from overheating, this vacuum cleaner is equipped with a thermostat which automatically shuts off the motor if it overheats. Should this happen: 1. Turn off the switch and unplug the cleaner because the thermostat will allow the cleaner to automatically start running again when the motor cools (approximately 30 minutes);...
Assembly Items NOTE: Unpack and identify all parts. Fully assemble before using. Cord Rewind Button Power Switch Bag Change Indicator Hose has Handle with remote controls (4a) and coupling (4b) with plug (4c). See instructions on pages 6 and 7. Bag Cover Latch Carrying Handle Parking slot for bare floor nozzle is located on the bottom and rear of the canister.
How to Assemble and Use Hose Handle Remote ON/OFF Selector for motorized nozzle *Off – push down on front Bare Floor – push down on back *Power ON/OFF for canister can only be controlled by canister ON/ OFF switch. Vacuum Control Cleaning suction is reduced by pushing lever to LOW position.
Tools 11. The tools are stored in the tool caddy attached to the upper wand. To use cleaning tools, attach them directly to end of hose or use the button-lock wand. Twist the round end of tool onto hose or wand until secure.
How To Maintain The paper bag and filters play a very important role in the efficiency of the vacuum cleaner. The purpose of the paper bag is to trap dirt and at the same time the paper must be porous enough to allow air to pass through. If the paper bag or filters become clogged, no air can pass through the cleaner and no cleaning takes place regardless of how powerful the unit.
Filters For maximum efficiency, be sure to maintain the motor filter and the final filter regularly. Motor Filter Inspect the motor filter with each disposable dust bag change. The motor filter in the dust bag compartment should be cleaned when necessary or about twice a year. 1.
To prevent injury, avoid touching the pulleys when servicing the drive belt. 1. Remove four screws from bottom side. Turn unit over; pull up on hood to remove. Replace light bulb, if necessary. Use GE Branded replacement bulb, Part No. 48815 listed on customer order form. (15 watt maximum) Continue to step 2 to change belt.
Customer Assistance If you have a claim under this warranty, please call our Customer Assistance Number. For faster service please have model, series, and type numbers ready for operator to assist you. These numbers can be found on the rating plate on the bottom of your cleaner.
1 floor brush 1 disposable 1 crevice tool dust bag Thank you for selecting a GE brand cleaner. Don’t Forget to Use GE Brand Filters and Belts is a trademark of the General Electric Company used under license to Wal-Mart Stores Inc., Bentonville, AR Part No.