Choose Sound - Philips HTB9225D User Manual

Caution
•
To prevent loud feedback or unexpected noise, turn
the microphone volume to the minimum before you
connect the microphone to your home theater.
1
Connect a karaoke microphone to the
MIC connector on your home theater.
2
Switch your TV to the correct source for
your home theater.
3
Make sure that audio post processing
is enabled on your home theater (see
'Speaker settings' on page 30).
4
While playing a karaoke disc, press
OPTIONS.
» The options menu is displayed.
5
Select [Karaoke], and then press OK.
» The karaoke setup menu is displayed.
6
Press the Navigation buttons (up/down)
and OK to change the following settings:
[Microphone]: Turn the microphone
•
on or off.
[Microphone volume]: Change the
•
microphone volume.
[Echo]: Change the echo level.
•
[Key]: Change the pitch to match your
•
voice.
[Vocal support]: Select an audio mode,
•
or turn the vocals on or off.

Choose sound

This section helps you choose the ideal sound
for your video or music.
1
Press SOUND SETTINGS.
2
Press the Navigation buttons (left/right) to
access the sound options on the display.
Sound options Description
SOUND
Select a sound mode.
SURROUND
Select surround sound or
stereo sound.
AUD SYNC
Delay the audio to match the
video.
AUTO VOL
Reduce sudden changes in
volume, for example, during
TV commercials.
3
Select an option, and then press OK.
4
Press BACK to exit.
• If you do not press a button within a
minute, the menu exits automatically.
Surround sound mode
Experience an immersive audio experience with
surround sound modes.
1
SOUND SETTINGS.
Press
2
Select SURROUND, and then press OK.
3
Press the Navigation buttons (up/down)
to select the following settings:
AUTO: Surround sound based on the
•
audio stream.
V SURR: Virtual Surround.
•
STEREO: Two-channel stereo sound.
•
Ideal for listening to music.
4
Press OK to confirm.
Sound mode
Select predefined sound modes to suit your
video or music.
1
Make sure that audio post processing is
enabled at the speakers (see 'Speaker
settings' on page 30).
2
SOUND SETTINGS.
Press
3
Select SOUND, and then press OK.
4
Press the Navigation buttons (up/down)
to select a setting on the display:
AUTO: Automatically select a sound
•
setting based on the sound stream.
• BALANCED: Experience the original
sound of your movies and music,
without added sound effects.
EN
27