[Format]; [Language]; [Stabilizer Demo.] - Panasonic Lumix DMC-LF1 Owner's Manual

Basics
• For the setting procedures of the menu.

[Format]

Use when [Built-In Memory Error] or [Memory Card Error] appears, or when formatting
the built-in memory or card.
When a card/built-in memory is formatted, the data cannot be restored. Check the
content of the card/built-in memory carefully before formatting.
●
When formatting the built-in memory, remove the cards.
(Only inserted card will be formatted if present; built-in memory will be formatted if no
card is inserted.)
●
All protected pictures and other picture data will be deleted.
●
Do not turn off the camera or perform other operations during formatting.
●
Always format cards with this camera.
●
Formatting the built-in memory may take several minutes.
●
If the card cannot be formatted, please try another card before contacting your
nearest Service Center.
For USA and Puerto Rico assistance, please call: 1-800-211-PANA(7262) or, contact
us via the web at: http://www.panasonic.com/contactinfo
For Canadian assistance, please call: 1-800-99-LUMIX (1-800-995-8649).

[Language]

Change display language.
Set the language displayed on the screen.

[Stabilizer Demo.]

Extent of jitter is shown on graph (estimate).
Extent of jitter
Extent of jitter after correction
●
During demo screen display, the Optical Image Stabilizer switches ON and OFF every
time [MENU/SET] is pressed.
(→52)
- 64 -
Using the [Setup] menu
VQT5A33