Usb Configuration - Foxconn G41MX Series User Manual

USB Configuration

USB Configuration
Module Version - 2.24.3-13.4
USB Devices Enabled :
1 Drive
Legacy USB Support
USB 1.1 Controller
USB 2.0 Controller
► USB Storage Configuration
↑↓←→:Move Enter:Select
► Legacy USB Support
This item is used to enable the support for USB devices on legacy OS. If you have a USB
keyboard or mouse, set to auto or enabled.
► USB 1.1 Controller
This item is used to enable or disable the Universal Host Controller Interface for USB.
► USB 2.0 Controller
This item is used to enable or disable the Enhanced Host Controller Interface for USB.
If USB devices are connected to the computer, the following item will appear :
► USB Storage Configuration
After pressing <Enter>, you can set the reset delay for the USB storage device. There are
many different emulation types of this USB device, such as floppy, hard disk and CDROM can
be selected.
CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.
+/-/:Value
F9:Optimized Defaults
USB Configuration
Enables support for
legacy USB. AUTO
option disables
legacy support if
no USB devices are
[Enabled] connected.
[Enabled]
[Enabled]
[Enabled]
[Press Enter]
F10:Save ESC:Exit
38
Help Item
AUTO
F1:General Help