Advanced Chipset Features Advanced Chipset Features; North Bridge Configuration; Dram Frequency - Foxconn G41MD User Manual

Advanced Chipset Features
Advanced Chipset Settings
WARNING: Setting wrong values in below sections

► North Bridge Configuration

► North Bridge Configuration
► South Bridge Configuration ► South Bridge Configuration
↑↓←→:Move Enter:Select
► North Bridge Configuration/ South Bridge Configuration
Press <Enter> to go to its submenu.
North Bridge Configuration
North Bridge Chipset Configuration North Bridge Chipset Configuration
Memory Remap Feature
PCI MMIO Allocation:4GB To 3328MB

DRAM Frequency

Memory Command Rate Memory Command Rate
Memory Timing by SPD
Memory Hole
Initate Graphic Adapter
IGD GTT Graphic smemory size [No VT mode, 2MB]
DVMT Mode Select
PEG Port
↑↓←→:Move Enter:Select
► Memory Remap Feature
This item is used to enable/disable memory remap feature. Its mainly for if you have a 64bit
OS and 4GB of RAM. Basically it allows you to remap the overlapped PCI memory above the
total physical memory.
► DRAM Frequency
This item is used to adjust the DRAM frequency. Select [Auto] for SPD enable mode. You also
can select a value manually such as [800 MHz].
► Memory Command Rate
This feature allows you to select the delay between the assertion of the Chip Select signal till
CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.
Advanced Chipset Features
may cause system to malfunction.
[Press Enter] [Press Enter]
[Press Enter]
+/-/:Value F10:Save ESC:Exit
CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.
North Bridge Configuration
[Enabled] [Enabled]
[Auto] [Auto]
[Auto] [Auto] [Auto]
[Enabled] [Enabled]
[Disabled]
[PEG/PCI] [PEG/PCI]
[DVMT Mode] [DVMT Mode]
[Auto]
+/-/:Value
F9:Optimized Defaults
Configure North Bridge
features.
F9:Optimized Defaults
ENABLE: Allow
remapping of
overlapped PCI memory overlapped PCI memory
above the total above the total above the total
physical memory. physical memory.
DISABLE: Do not allow DISABLE: Do not allow
remapping of memory.
F10:Save ESC:Exit
33
Help Item
F1:General Help
Help Item
F1:General Help