Foxconn G31MX User Manual page 29

Day—weekday from Sun. to Sat.
Month—month from 1 to 12
Date—date from 1
Year—year, set up by users.
Use <ENTER>,<TAB> or <SHIFT+TAB]>to select a field.Use <+>or <-> to
configure system time and date.
1.2 IDE Channel 0/1/2/3 Master/slave
These categories identify the HDD types of 1 IDE channel installed in the
computer system. There are three choices provided for the Enhanced IDE
BIOS: None, Auto, and Manual. "None" means no HDD is installed or set;
"Auto" means the system can auto-detect the hard disk when booting up; by
choosing "Manual" and changing Access Mode to "CHS", the related informa-
tion should be entered manually. Enter the information directly from the key-
board and press < Enter>:
Cylinder number of cylinders
Precomp write pre-compensation
Sector number of sectors
Award (Phoenix) BIOS can support 3 HDD modes: CHS, LBA and Large.
CHS For HDD<528MB
LBA For HDD>528MB & supporting LBA (Logical Block Addressing)
Large For HDD>528MB but not supporting LBA
Note: Set to [Auto] , the system can detect the hard disk and select the
HDD mode automatically when booting up. Suggest you select this option.
1.3 Drive A
This option allows you to select the kind of FDD to be installed, including
[None], [360K, 5.25 in], [1.2M, 5.25 in], [720K, 3.5 in], [1.44M, 3.5 in] and
[2.88 M, 3.5 in].
1.4 Halt On
This category determines whether or not the computer will stop if an error
is detected during powering up.
All Errors Whenever the BIOS detects a nonfatal error, the system
will stop and you will be prompted.
No Errors The system boot will not stop for any errors that may
be detected.
st to 31 st
Head
Landing Zone
Chapter 2 BIOS Description
number of heads
landing zone
23