Center Rear Lap Belt - Chevrolet Spark Owner's Manual

2–8 SEATS AND OCCUPANT PROTECTION SYSTEMS

CENTER REAR LAP BELT

To fasten the center rear lap belt:
1. Hold the metal latch plate 90-degrees to
the belt and pull belt low across hips.
2. Insert the latch plate into the buckle.
INSERT to fasten
PRESS to unfasten
3. Pull free end of belt away from latch
plate to tighten belt.
4. Pull on belt clip to take up slack.
To remove the lap belt, press the release
button on the buckle.
PULL to
lengthen
S3W1063A
• After a collision, inspect all safety
• It is dangerous to operate your ve-
Failure to make appropriate repairs
may result in additional damage to
your vehicle or personal injuries.
Belt clip
PULL
PULL
S3W1064A
WARNING
belts and related parts for fraying
or other damage. Ask your
CHEVROLET retailer to replace
any damaged parts.
hicle with damaged safety belts or
other parts.