Control Play; Advanced Sound Settings; Update Firmware - Philips DS8800W User Manual

Stream from your Wi-Fi enabled PC
or Mac installed with iTunes 10 (or
later)
Note
•
Before you open iTunes, make sure that you have
enabled Bonjour service in your PC. Take Windows
XP for example: to enable the service, you can click
Start->Settings->Control Panel, and double-click
Administrative Tools-> Services->Bonjour Service,
and then click Start followed by OK on the pop-up
menu.
1
Open iTunes 10 (or later).
2
Click the AirPlay icon at the bottom right
corner of the window.
3
Select Philips_Fidelio_AirPlay XXXX (or
user customized name) from the list.
4
Select a media file and start play.
5
Wait until successful audio streaming to
the speaker.

Control play

You can select different play options from either
your AirPlay device or the supplied remote
control.
Note
•
All the operations below are based on the supplied
remote control.
• To start or pause play, press
• To skip to the previous or next track, press
/ .
To adjust volume, press +/- repeatedly.
•
• To mute or restore volume, press .
• To switch to the AUX IN source (if
connected), press .
• To switch back to the AirPlay device
source, press .
EN
18

Advanced sound settings

For advanced sound settings and additional
features, you can use your AirPlay device to
download the Philips Fidelio application from
Apple App Store.

Update firmware

•
Download the update file
1
2
3
Update from the configuration page
1
2
.
Note
You can only update the firmware from a PC/Mac.
On your PC/Mac, go to www.philips.com/
support.
Enter the model number to find the latest
firmware upgrade file available.
Save the upgrade file to your hard drive.
Power on the unit (see 'Prepare - Connect
- Connect power').
» It takes about 35 seconds for the unit
to boot up. During boot-up, the
indicator on the front of the main unit
blinks in green quickly.
» After boot-up, the
blink in green slowly.
Make sure that the unit and PC/Mac are
connected to the same wireless router.
indicator starts to