Table of Contents
Advertisement
Setting Private Time
You can set your pager to Private Time. During this time the pager will still
receive messages as usual but it will not alert.
- From the Status screen, press the
"
- The display shows "
(Function) button to select ON or OFF. Press the
button to confirm your selection
Note: If you select OFF the pager will return to the Status screen. If you
select ON proceed to the next step.
- To set pager START time scroll through hours by pressing the
(Function) button for each hour increment, then press the
Select) button to set and advance to the minutes. Repeat this step to set
minutes and "
- Press the
the above steps
- When complete, press the
18
Status screen
" displays, and then press the
" with a flashing "
" or "
", if you pager is set to display 12 hour time format
(Read/ Select) button to set the END time by repeating
(Read/Escape) button to return to the
(Function) button 10 times until
(Read/ Select) button
" or "
" , toggle the
(Read/ Select)
:
(Read/
Advertisement
Table of Contents
