Pptp; Interface Group - D-Link DSL-2640U User Manual

Appendix A – Troubleshooting

PPTP

To access the PPTP Setting window, click the PPTP button in the Advanced Setup directory.
To set up Point-to-Point Tunnel Protocol, tick the Enable check box, enter
the appropriate information in the fields offered, and then click the
Save/Apply button when you are finished.

Interface Group

To access the Internet Group window, click the Internet Group button in the Advanced Setup directory.
Use this window to enable port mapping. Tick Enable virtual ports on
and enter
If you are setting up the mapping groups, click the Add button.
D-Link DSL-2640U User Manual 63