Beko DSFN 1530 Manual page 13

��������������������
�������� ������ ������
����� ������� �������
��� ���
��� ���
�������
������� ���� ����
������� ����� �����
�������
����� �����
�������
����� �����
������� ����� �����
! For level 5 and level 6 there is no
difference between hardness level
settings.
If the hardness of the water you
use is more than 80°dF (French
Hardness) or if you are using pit
water, we recommend that you use
filters and purifiers.
* If your tap water is below 9F
(French hardness), you do not need
to use special dishwasher salt in your
machine. In this case, salt indicator
light will be on continuously.
•
Open the door of the machine
•
Press programme selection button
when machine is switched off.
•
Keep programme selection button
pressed and press on/off button
to turn your machine on. Do not
release the programme selection
button until the defined "Water
Hardness Level Indicator" of your
machine is displayed ( See Water
Hardness Level Adjusment Table )
�
������
��������
��
����������������������������������������������
���
�������������
�����������������������������������������������
�����
�������������
����������������������������������������������
�����
�������������
�������������������������������������������������
�����
�����������������������������
�����
��������������������������������������������������
�����������������������������
�����
12 GB
������������������������
Programme Follow-up indicators
light up continously when machine
enters into the water hardness
adjustment mode.
•
To adjust new Water Hardness
Level: adjust the water hardness
level according to the "Water
Hardness Level Adjustment Table"
( See Water Hardness Level
Adjusment Table ) by pressing the
programme selection button again.
•
If you select a water hardness
level other than stored in the
memory, programme follow up
indicators flash with an interval
of 1 second. The selected water
hardness level in indicated by the
Programme Selection indicators.
•
Press "Start/Pause/Cancel" button
for once to store the level you have
selected. Programme follow-up
indicators light up continuously
when the water hardness level is
stored.
•
Press the on/off button to turn off
your machine.