Selecting A Drum Set; Configuring A Custom Drum Set - Casio LD-80 User Manual

Selecting a Drum Set

The percussion sounds that make up the drum set you select are assigned to
the seven drum pads and two foot pedals. See "Drum Set List" on page A-2
for a list of available drum sets and their contents.
To select a drum set
1.
Press the DRUM SET button.
• The DRUM SET indicator lights and the currently selected drum set's
number appears on the display.
001
Drum set number
2.
Use the number pad to input the number of the drum set you want to use.
• Input a two-digit number. To specify Drum Set 08, for example, press [0]
and then [8].
• You can also use the (+) and (–) keys to scroll through numbers on the
display. Scrolling past drum set number 020 displays "CU," which indi-
cates the custom drum set. Holding down (+) or (–) scrolls at high speed.
• Make sure you always input a two-digit number in the range of 01 to 20.
E-16
Page 16
DRUM SET indicator

Configuring a Custom Drum Set

Your Digital Drum comes with 76 high-quality percussion sounds that you
can assign to any one of the seven drum pads and two foot pedals. This way
you can configure your own custom drum set that consists of the percus-
sion sounds you want.
• See "Percussion Sound List" on page A-1 for more information about
percussion sounds.
To configure a custom drum set
1.
Select the drum set you want to start from.
• See "To select a drum set" on this page.
2.
Press the ASSIGN button.
041
Percussion sound number
• The first percussion sound number that appears is the sound currently
assigned to Pad 1. The Pad 1 light is lit at this time.
3.
Strike the pad or press the pedal to which you want to assign a new
sound.
• To change the percussion sound assigned to Pad 7, for example, strike
Pad 7. This causes the pad's light to light, and the percussion sound
currently assigned to the pad appears on the display.
• The foot pedal indicator lights in the case of the foot pedal.
02.10.31, 14:19
ASSIGN indicator
273A-E-018A