T O Mount On A; Wall - GE 15381860 User Manual

T M
O OUNT ON A
1. Plug the short line cord into the jack on the bottom of
the base and connect the other end to a wall phone
jack.
2. Feed the short line cord through the grooves provided
so that the base area is flat and ready to mount on the

wall.

3. Slip the mounting holes of the base (on bottom of unit)
over the wall plate posts and slide the base down until
the phone is firmly in place.
4. Plug the coiled cord into the handset. Plug the other
end into the jack on the lower end of the base.
5. Set the RINGER switch on the base to HI.
• LO = Sound will be lower.
• OFF = Telephone will not ring.
6. Place the handset in the base.
4
12
W
ALL
1
2
5
3
RINGER VOLUME
HI LO OFF