Connection Setup - D-Link myPocket DIR-457 User Manual

Section 1 - Product Overview
D-Link DIR-457 User Manual

Connection Setup

USB MODEM MODE/CONNECTION MANAGER MODE
1. Move the router/modem selection switch to USB modem
mode.
2. Connect the DIR-457 myPocket Router to your computer with
the included USB cable. To do this, insert the USB cable into
the Micro-USB port of the DIR-457 myPocket Router and the
other end into a free USB port of your computer.
3. Press the power button on the DIR-457.
4. The Connection Manager software will automatically start up.
5. Configure your router/modem settings using the Connection
Manager.
6. You can now use the DIR-457 myPocket Router as a USB
modem.
Note: You have to install the Connection Manager software
when using the DIR-457 for the first time. After successful
installation, you can configure USB modem and WiFi router
basic settings. Only USB modem mode serves as Connection
Manager mode.
WIFI ROUTER MODE
1. Move the router/modem selection switch to WiFi router mode.
2. Press the power button on the DIR-457.
3. You can now use the DIR-457 myPocket Router as a wireless
access point and connect to the router with any WiFi capable
devices.
4