Advertisement
Quick Links
SUBWOOFER USER MANUAL
Thank you for buying FlatWire. This high-performance system enriches
the audio and aesthetic quality of all environments. FlatWire can be painted
to greatly reduce the visibility of wire on your wall, or completely hidden
with mesh tape, concealing compound (mud) & paint. Please read all
instructions before initiating your installation.
Please visit www.FlatWireReady.com for additional products, FAQs
and technical assistance.
FlatWire Products Required for Installation
x 10 or 20 feet
of PWR Series:1
Pair FlatWire
x2
Subwoofer
Wall Box
Tools for Installation
Pencil
Screwdriver
Tools for Concealment
Roller or Paintbrush
x1 Custom
RCA Patch
Terminator
Cord
(2 pieces)
x1 1 foot
x1 2 foot
x2 Subwoofer
x12 Flat
Wall Box
Head
Backplate
Screw
Pliers
Scissors
Painter's
Paint
Tape
x1 Spray
x1 Mesh
Adhesive
Tape
Tape Measure
Compound
Compound
Knife
Tray
x1 DVD
x1 User
Manual
Plastic
Level
Smoother
'Mud'
Concealing
Compound
Advertisement
Summary of Contents for FlatWire Subwoofer
- Page 1 SUBWOOFER USER MANUAL Thank you for buying FlatWire. This high-performance system enriches the audio and aesthetic quality of all environments. FlatWire can be painted to greatly reduce the visibility of wire on your wall, or completely hidden with mesh tape, concealing compound (mud) & paint. Please read all instructions before initiating your installation.
-
Page 2: Important Safety Instructions
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY IMPORTANT SAFETY INSTRUCTIONS → Read all instructions. → Do not install this surround sound system in a moist or wet location. Hazards & Warning For FlatWire Ready Spray Adhesive: ® DANGER: → EXTREMELY FLAMMABLE →... -
Page 3: First Aid
FlatWire Ready Spray Adhesive ® Cautionary Information Continued limits, wear an appropriate, properly fitted respirator during use and after application. Follow respirator manufacturer’s directions for respirator use. DO NOT get in eyes, on skin or clothing. Wear appropriate gloves to prevent skin contact (neoprene or nitrile). -
Page 4: Installation Instructions
: Connect Subwoofer wire: TOP of : Connect provided patch cord to Wall Terminator faces away from surface Boxes and your subwoofer Place powered subwoofer in front of electrical outlet, if possible. Follow Directions for Use & Cautionary Instructions on Spray Adhesive can. - Page 5 : Test subwoofer FlatWire : Attach one Wall Box to mounting surface with 4 screws Pan Head Screw : Attach Wall Box backplate to surface : Disconnect patch cords and non- with 2 screws mounted Wall Box Pan Head Screw Note: To shorten the wire, follow steps 2.1-2.6.
- Page 6 : Break away tab : Trim excess FlatWire : Shake can. Spray adhesive to path for concealment with joint compound, or spray FlatWire directly for concealment with paint. Spray 8’ or less at a time. Wait 60 seconds. mudding If painting...
- Page 7 : Disconnect & remove subwoofer: Cover Wall Boxes with painter’s tape : Apply mesh tape over FlatWire (do not overlap the mesh tape), or cover with paint if painting only If painting mudding then then : Apply thin & wide layers of joint...
- Page 8 : Paint : Reconnect system elements and enjoy! WAIT Please visit www.FlatWireReady.com for Tips & Tricks as well as FAQs about the product installation.
- Page 9 → Run FlatWire adjacent to molding or trim. → Insert under chair rail as possible, & when FlatWire runs over chair rail, do not use compound on the chair rail - only paint the FlatWire. → Avoid layering runs of FlatWire, when possible.
- Page 10 Southwire Company One Southwire Drive Carrollton, Georgia 30119 www.FlatWireReady.com...
Need help?
Do you have a question about the Subwoofer and is the answer not in the manual?
Questions and answers