Advertisement
OWNERS MANUAL
Internal Jumper Option
* PDLC81 shown with top cover removed.
A) Isolation Jumpers - This jumper provides three different ground isolation options for the input of the
PDLC81.
The three input options include GND, Isolation, and 200ohms. Make sure the coe6 is turned off before
making your selection.
B) Blending Jumpers - These jumpers are used to select either a Direct (separate) or a Blended
(summed) output. In the direct position the signal on an individual channels input will come out the
same channels output. In the blended position the signals on two or more channels can be combined
with Channel 1 to provide one full range output. All of the channels that have been selected to have their
inputs blended will be combined and output onto Channel 1. Each of the remaining channels being
blended (2, 3, & 4) will have the same signal on their channels output as what is on their input (not a
full range output like Channel 1).
Pacific Accessory Corporation
Pacific Accessory Corporation
Santa Ana, California 92705 | Ph. 866-931-8021 | support@pac-audio.com
©2012 Pacific Accessory Corporation
www.pac-audio.com
B
®
A
5
Advertisement
