Fujitsu LIFEBOOK T902 User Manual page 47

Dragging
Dragging means moving an item with the stylus by
touching the screen, moving and then lifting the
stylus. To drag, touch the Active Digitizer Display
with your stylus on the item you wish to move. While
continuing to touch the screen with the stylus, drag
the item to its new location by moving the stylus
across the screen, and then lifting the stylus to
release it (Figure 26).
Calibrating the Active Digitizer Display
In order to ensure accurate tracking between the stylus and cursor, you must run the Calibration Utility before you use
the system for the first time, or after you change the display resolution.
T
•
HE FIRST TIME YOU PERFORM A CALIBRATION
PERFORMED IN LANDSCAPE OR PORTRAIT MODE
T
•
HE FIRST TIME YOU CALIBRATE
.
POINTS
To run the calibration utility:
Go to Start -> Control Panel.
1
Click Hardware and Sound, then select Tablet PC Settings
2
Under the Display tab, click the [Calibrate] button.(Note: If you have the optional capacitive touchscreen, you will
3
need to click on either Pen input or Touch input, depending upon which method you want to calibrate.)
Adjust the display of your Tablet PC to a comfortable angle and find the (+) symbol in the upper-left corner of the
4
display.
,
THE SYSTEM DISPLAY SHOULD BE IN LANDSCAPE MODE
.
, 16
THERE WILL BE CALIBRATION POINTS
41 - Touchpad/Active Digitizer/Touchscreen
Figure 26. Dragging on the Display
. S
UBSEQUENT CALIBRATIONS CAN BE
;
SUBSEQUENT CALIBRATIONS WILL REQUIRE ONLY FOUR CALIBRATION