Advertisement
PACKAGE CONTENT ............................................................................................ 2
FUNCTION CONTROLS ........................................................................................ 3
SYSTEM SETUP .................................................................................................... 4
HARDWARE INSTALLATION ................................................................................ 5
OPERATIONS......................................................................................................... 6
TROUBLE SHOOTING .......................................................................................... 8
2.4GHz Wireless Audio/Video Kit
Universal IR Remote Control Extension
With 8 Coded Channels
User Manual
W-AVS4
PAGE INDEX
Advertisement
Table of Contents
Summary of Contents for Ambery W-AVS4
-
Page 1: Table Of Contents
2.4GHz Wireless Audio/Video Kit Universal IR Remote Control Extension With 8 Coded Channels User Manual W-AVS4 PAGE INDEX PACKAGE CONTENT .................... 2 FUNCTION CONTROLS ..................3 SYSTEM SETUP ....................4 HARDWARE INSTALLATION ................5 OPERATIONS......................6 TROUBLE SHOOTING ..................8... -
Page 2: Package Content
The standard package of this product includes the following items: Wireless Transmitter Unit Wireless Receiver Unit DC Power Adapter x 2 Infrared Remote Control Extender Wire Composite RCA A/V Cable x 2 User Manual W-AVS4 June, 2010... -
Page 3: Function Controls
Channel Frequency Select Button Power On/Off Switch Power Plug ID Code Setting IR Remote Sensor Window With IR Data LED Indicator [Note]: The 4 selectable transmission frequency channels are solely controlled from the wireless receiver end only. W-AVS4 June, 2010... -
Page 4: System Setup
SYSTEM SETUP W-AVS4 June, 2010... -
Page 5: Hardware Installation
[For Receiver Unit]: Connect the wireless receiver to an end receiving equipment such as TV, projector, A/V receiver, video monitor, powered speaker, etc. [For Power Supply]: Connecting the supplied power adapters between the household outlets and the wireless transmitter/receiver units. W-AVS4 June, 2010... - Page 6 IR port in the back panel first. Next try positioning the head of the IR extender wire in front of the A/V device’s IR sensor window or attaching it onto the A/V source’s IR sensor window using double-sided tape. W-AVS4 June, 2010...
-
Page 7: Operations
There are 4 channels of frequencies to be selected. [Note]: The receiver will not function properly if you press the channel button for switching channel while the IR Data LED is flashing. W-AVS4 June, 2010... -
Page 8: Trouble Shooting
-->Make sure the distances from your remote control to the receiver’s IR window and from remote extender wire to the transmitter are within the valid range. -->Check the ID code setting on both TX and RX units are the same one. W-AVS4 June, 2010... - Page 9 -->The ID code can be configured in 8 different types through using the dip switch on the back panel of transmitter TX unit or receiver RX unit. Again in most cases, you do not need to worry about this ID code setting. Default setting is always recommended unless change is necessary. W-AVS4 June, 2010...
Need help?
Do you have a question about the W-AVS4 and is the answer not in the manual?
Questions and answers