Wind Screen - Canon MVX25i Instruction Manual

Wind Screen

The camcorder reduces wind noise automatically. However, you can turn off the wind
screen when recording indoors, or when you want the microphone to be as sensitive
as possible.
CAMERA
*
Only when [AUDIO DUB.] is set to [MIC IN].
AUDIO SETUP
( 36)
Open the menu and select [AUDIO SETUP]. Select [WIND SCREEN], set it to
[OFF] and close the menu.
"WS |" appears when you turn the wind screen off.
The wind screen function can only be used with the built-in microphone.
Using Headphones during Recording
The headphones terminal also serves as AV terminal. Headphones can only be used
when "H" is displayed on the screen. If not, change the setting following the
procedure below.
CAMERA
VCR SETUP
( 36)
Open the menu and select [VCR SETUP]. Select [AV/PHONES H], set it to
[PHONES H ] and close the menu.
Adjusting the Headphone Volume
CAMERA
AUDIO SETUP
( 36)
Open the menu and select [AUDIO SETUP]. Select [ H VOLUME], adjust the
volume with the SET dial and close the menu.
You can turn off the volume completely by turning the SET dial down until [OFF] appears.
Turn the SET dial up to increase the volume again.
*
PLAY (VCR)
PLAY (VCR)
PLAY (VCR)
CARD CAMERA
WIND SCREEN••AUTO
CARD CAMERA
AV/PHONES ••AV
CARD CAMERA
HVOLUME•••••
E
CARD PLAY
CARD PLAY
CARD PLAY
61