Seat Adjustment Lever; Hour Meter; Tracking Knob - Husqvarna RZ4824F Operator's Manual

Seat Adjustment Lever

The seat can be adjusted lengthways. When making
adjustments, the lever under the right side of the
seat is pulled up, after which the seat can be moved
backward or forward.
IMPORTANT INFORMATION
Seat should not be adjusted while unit is in
motion.

Hour Meter

The hour meter displays the total operating time.
It will flash CHG OIL (Change Oil) at 50 hour intervals.
The flash duration is one hour before and one hour
after the interval. The CHG OIL icon will come on
and shut off automatically. The hour meter cannot be
manually reset.

Tracking Knob

If the mower is not tracking straight, check the
air pressure in both rear tires. Recommended air
pressure is 15 psi (103 kPa / 1 bar) for all tires.
Tracking must be checked on a flat and level concrete
or blacktop surface.
Rotating the tracking knob allows fine tuning
adjustments so the machine tracks straight with the
steering control levers in the full forward position.
Rotate the knob out to loosen and increase the speed
on the left lever. Rotate in to tighten and decrease
speed.
CONTROLS
Lengthways adjustment
Hour meter
Tracking knob
8058-023
8058-134
8058-020
23