Activate Your Device - Zte Optik User Manual


Insert the USB end of the cord into the AC adapter.

Plug the AC adapter into an electrical outlet. Fully charging a battery may take up to
three hours.
Note: Your device's battery should have enough charge for the device to turn on and find a
signal and run the setup application. You should fully charge the battery as soon as
possible.
2. Press and hold the Power key to turn the device on.

If your device is activated, it will turn on, search for Sprint service, and begin the
setup application.

If your device is not yet activated, see

Activate Your Device

Depending on your account or how and where you purchased your device, it may be ready to
use or you may need to activate it on your Sprint account.
● If you purchased your device at a Sprint Store, it is probably activated and ready to use.
Get Started
Activate Your Device
3
for more information.