Pioneer VSA-AX10Ai Operating Instructions Manual page 7

Application Operations
This section explains operations that you do in the application, from receiving measurement data to
displaying graphs and saving the data.
Receiving measurement data
1
Double click the application
You can also start the application by selecting "Program" = "Pioneer Corporation" = "Advanced
MCACC" from the "Start" menu.
The application starts.
2
Select "Receive" under "File" on the menu bar.
3
Select the number of the COM port to which the RS-232 cable is connected and
click "OK."
If you do not know which COM port number to select, try selecting each port in turn, beginning with
"COM1."
Data transmission starts. (It should finish in about 10 seconds.)
When reception finishes, graphs of the received data appear.
Note
Refer the operating instructions of your PC for more information about COM port settings.
Troubleshooting
If an error occurs when you select "Receive" and no data is sent.
shortcut icon on the PC desktop.
7
COM port selection box
Continue Continue