Table of Contents
Advertisement
Basic adjustment settings
C.M.S. (Colour Management System)
Colour tone is managed using the six-colour
adjustment setting.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Picture".
3
Press a/b to select "Advanced", and then
press ENTER.
4
Press a/b to select "C.M.S.-Hue", and then
press ENTER.
5
Press a/b to select a specific adjustment
item.
C. M. S-Hue
C. M. S-Saturation
C. M. S-Value
Changing reds
closer to
magenta or yellow.
• You can select "C.M.S-Saturation" or "C.M.S-
Value" here instead of selecting "C.M.S-Hue".
6
Press c/d to adjust the item to your desired
position.
NOTE
• For resetting all adjustment items to the factory preset
values, press a/b to select "Reset", and then press
ENTER.
Selected item
C.M.S-Hue
This is a standard to adjust the colour
either more reddish or more bluish in tone.
C.M.S-
Increases or decreases the saturation of a
Saturation
selected colour
C.M.S-Value
A higher value makes the image brighter.
A lower value makes the image darker.
R
[ 0]
–30
+30
Y
[ 0]
–30
+30
G
[ 0]
–30
+30
+30
C
[ 0]
–30
B
[ 0]
–30
+30
M
[ 0]
–30
+30
Reset
Description
Colour temperature
Adjusts the colour temperature to give the best white
image.
1
Repeat steps 1 to 3 in C.M.S. (Colour
Management System).
2
Press a/b to select "Colour Temp", and then
press ENTER.
3
Press a/b to select the desired level, and
then press ENTER.
Selected item
High
Mid-High
Mid
Mid-Low
Low
Black
For easier viewing, change the viewing depth by
selecting a level for automatically adjusting the dark
portion of an image.
1
Repeat steps 1 to 3 in C.M.S. (Colour
Management System).
2
Press a/b to select "Black", and then press
ENTER.
3
Press a/b to select "On", and then press
ENTER.
C. M. S. – Hue
C. M. S. – Saturation
C. M. S. – Value
Colour Temp
Black
3D - Y/C
Monochrome
Film Mode
I/P Setting
Selected item
Off
No adjustment
On
For high detail in black portions
Description
White with bluish tone
White with reddish tone
On
Off
Description
27
Advertisement
Table of Contents
