Enter Coordinates - Navigon 20 easy User Manual

Indicated on the Activate MyRoutes button is whether several route
suggestions are to be calculated (Yes) or not (No).
►
Note: The Activate MyRoutes button is available only when you have
entered all the address information. You can also make this setting
under Options > Settings > Navigation > Activate MyRoutes.
5. Tap on Navigation in order to navigate to the stipulated address.
- or -
Tap on Parking in order to search for and navigate to a car park
near your destination.
Sometimes the destination cannot be found exactly because, for
example, the entered combination of place and street name exists
several times.
In this case a window will open with a list of all the addresses
matching your entry plus additional information.
►
If the entered house number is not included on the map, the window
will show an address with the house number closest to the one
entered.
The map opens in Preview mode. The destination is indicated on
the map.
For detailed information on how to start navigation, please refer to
chapter "Route preview" on page 34. Please read on there.
Note: It is not necessary to enter all the address details. You can tap on
If you specify the town only, the navigation system will calculate a route
to the town centre.
If you specify only the town and street without specifying a house
number or cross street, the navigation system will calculate the best
route to this street.
5.2.3

Enter Coordinates

You can also enter the geographic coordinates of your destination. The
coordinates can be entered as decimal degrees or in degrees, minutes
and seconds.
1. In the N
Coordinates.
The E
Navigation
Tap on Activate MyRoutes in order to change the setting.
Tap on the address to which you want to navigate.
(Navigation) before you get that far.
window, tap on New Destination > Enter
AVIGATION
C
NTER OORDINATES
User's manual NAVIGON 20 EASY | 20 PLUS
window opens.
- 25 -