AMS Neve 1073DPA User Manual

AMS Neve 1073DPA User Manual

Mic pre-amplifier

Advertisement

1073DPA & 1073DPD Mic Pre-Amplifier
AMS
NEVE
1073DPA and 1073DPD
Mic Pre_Amplifier
© 2005 AMS Neve Ltd own the copyright of all
information and drawings contained in this manual which
are not to be copied or reproduced by any means or
disclosed in part or whole to any third party without
written permission.
As part of our policy of continual product improvement,
we reserve the right to alter specifications without notice
but with due regard to all current legislation.
Disclaimer: The information in this manual has been
carefully checked and is believed to be accurate at the
time of publication. However, no responsibility is taken by
us for inaccuracies, errors or omissions nor any liability
assumed for any loss or damage resulting either directly or
indirectly from use of the information contained within it.
Issue 3

User Guide

527 - 349
Issue 3
H E A D O F F I C E
AMS NEVE PLC • BILLINGTON ROAD • BURNLEY
LANCS BB11 5UB • ENGLAND
TELEPHONE: +44 (0) 1282 457011 • FAX: +44 (0) 1282 417282
L O N D O N O F F I C E
TELEPHONE: +44 (0) 20 7916 2828 • FAX: +44 (0) 20 7916 2827
N O R T H A M E R I C A N O F F I C E S
AMS NEVE INC., NEW YORK
TEL: +1 (212) 965 1400 • FAX: +1 (212) 965 9306
AMS NEVE INC., HOLLYWOOD
TEL: +1 (818) 753 8789 • FAX: +1 (818) 623 4839
e-mail: enquiry@ams-neve.com
http://www.ams-neve.com
User Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 1073DPA and is the answer not in the manual?

Questions and answers

Summary of Contents for AMS Neve 1073DPA

  • Page 1: User Guide

    User Guide 527 - 349 Issue 3 © 2005 AMS Neve Ltd own the copyright of all information and drawings contained in this manual which are not to be copied or reproduced by any means or disclosed in part or whole to any third party without written permission.
  • Page 2: Table Of Contents

    1073DPA & 1073DPD Mic Pre-Amplifier User Guide Contents Introduction 1073DPA 1073DPD Dimensions Rack Mounting and Cooling Power Requirements Mains Supply DC Power Supply Indicators Phantom Power Rear Panel Connectors 1073DPA 1073DPD Amplifier Controls 1073DPA 1073DPD DPD Headroom Level Setting Specifications...
  • Page 3: Introduction

    Introduction 1073DPA The latest addition to the Neve outboard range, the 1073DPA provides two of the world famous Class A Neve 1073 microphone pre-amplifiers. This classic design is a consummate mic pre for recording vocals, guitars and acoustic instruments of all descriptions.
  • Page 4: Dimensions

    1073DPA & 1073DPD Mic Pre-Amplifier User Guide Dimensions Units Depth Height Approx. Weight mm (inches) mm (inches) kg (lbs) 1073DPA / 1073DPD 254 (10) 45 (1.75) 5 (11) Rack Mounting and Cooling The rack units should be installed in a 19" cabinet with access to the front and rear.
  • Page 5: Rear Panel Connectors

    1073DPA & 1073DPD Mic Pre-Amplifier User Guide Rear Panel Connectors Mating connectors are not supplied with these units. 1073DPA WARNING ! DISCONNECT MAINS BEFORE REMOVING COVER FUSE 1.6AT 250VAC POWER 60W MAX MAINS IN 100-240VAC LINE OUT 2 LINE IN 2...
  • Page 6: Amplifier Controls

    1073DPA & 1073DPD Mic Pre-Amplifier User Guide Amplifier Controls 1073DPA Mic Input 1200ohm (Hi-Z) or 300ohm (Lo-Z) input impedance transformer coupled stage. 48V is switchable onto the Mic Input. Mic gain is across two class A gain stages. The signal then feeds a transformer balanced class A output stage via a +/-10dB trim.
  • Page 7 1073DPA & 1073DPD Mic Pre-Amplifier User Guide The ADC is set up to output 0dBFS with +26dBu at the Line Output or Insert point but can be changed to output +18dBu for 0dBFS. See page 6 for change information. Sampling Frequency The left hand FORMAT switch selects the 44.1kHz PCM range, the 48kHz PCM range or DSD.
  • Page 8 1073DPA & 1073DPD Mic Pre-Amplifier User Guide Issue 3 Page 6...
  • Page 9: Dpd Headroom Level Setting

    Switch. If you have a unit which does NOT have this switch fitted and you need to change the level setting please contact AMS Neve or your local distributor. How to change the Headroom Level Setting The unit can be set to one of two headroom settings; 18dB or 26dB. The headroom set is the number of dB above 0dBu before the ADC clips.
  • Page 10: Specifications

    1073DPA & 1073DPD Mic Pre-Amplifier User Guide Specifications 1073DPA Input Impedance: Mic switchable 300ohm or 1200ohm Line 20kohm Frequency Response: 60dB gain into 600ohm 20Hz to 20kHz +/-0.5dB 60dB gain into 600ohm 20Hz to 40kHz -3dB EIN: Mic 60dB gain <-125dB...

This manual is also suitable for:

1073dpd

Table of Contents