Blu-Comm Bluetooth Adaptors User Manual

For motorola and kenwood portable radios, adaptor allows you to use a compatible wireless headset or other audio accessory with your two-way radio

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

Blu-Comm™ Bluetooth® Adaptors User Guide

For Motorola and Kenwood portable radios

The Blu-Comm™ Adaptor allows you to use a compatible wireless headset or

other audio accessory with your two-way radio.

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful interference in a residential installation. Thisequipment generates uses

and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the equipment oﬀ and on, the user is encouraged

to try to correct the interference by one of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit diﬀerent from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user's authority to

operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. To maintain compliance with FCC

RF exposure compliance requirements, please avoid direct contact to the transmitting antenna during transmitting.

Table of Contents

Need help?

Do you have a question about the Bluetooth Adaptors and is the answer not in the manual?

Questions and answers

Summary of Contents for Blu-Comm Bluetooth Adaptors

Page 1 Blu-Comm™ Bluetooth® Adaptors User Guide For Motorola and Kenwood portable radios The Blu-Comm™ Adaptor allows you to use a compatible wireless headset or other audio accessory with your two-way radio. Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Page 2 Quick Disconnect Accessory Port Multi-Function Talk Switch / Status LED Allows the connection of a QD series Used to place the Blu-Comm Adaptor in pairing wired audio accessory, such as a mode. The LED ﬂashes messages that let the user know Push-to-Talk, earphone, or the current status of the Blu-Comm Adaptor.
Page 3 Blu-Comm Adaptor, received signals should be muted. * The Talk button on the Blu-Comm Adaptor will function as a Push-to-Talk button. However the internal microphone in your portable radio will be disabled as long as the Blu-Comm Adaptor is attached.
Page 4 * Continue to hold the Talk button down for approximately three seconds. Release the Talk button when the status LED begins to ﬂash two times per second. * The Blu-Comm Adaptor is now in audio accessory pairing mode. Activate the pairing mode on your compatible wireless audio accessory.
Page 5 * If no wired accessory is connected, calls will be routed to a wireless accessory, if one is paired with the Blu-Comm Adaptor. * If no wireless headset or audio accessory is paired to the Blu-Comm Adaptor or the wireless accessory is turned oﬀ, received calls will be muted and will not be heard as long as the Blu-Comm Adaptor is attached to the radio..
Page 6 My wireless audio accessory or worked before, but is not working now. Make sure that the Blu-Comm Adaptor is properly connected to the two-way radio and that the radio is turned on. Ensure that your wireless audio accessory has a fully charged battery and is turned on.
Page 7 DISCLAIMER: The wireless link used by Blu-Comm products is an open standard, unsecured technology. Additionally, this product can mute the portable radios internal speaker and microphone if used with no wireless or wired audio accessory connected. This product is not recommended for ﬁrst-responder or other mission critical users.