The Operation Procedure For Inputting Characters Manually - Sharp BD-HP25X Operation Manual

SETTINGS
The operation procedure for
inputting characters manually
NOTE
• Numeric characters such as IP address can be entered
on the input screen either by selecting each of the
characters in the "Numeric" mode or using the Number
buttons on the remote control.
IP Address 123
Netmask
Gateway
1
Press ENTER at the boxes in which characters
are to be entered, and the input screen will
appear.
Numeric
Edit
1 2 3 4 5 6 7 8 9 0
Selected by pressing Selected by pressing
a/b c/d
2 Press a/b to select the desired input mode.
3 Press c/d to select a number, then press
ENTER.
46
4
Repeat the step 3 to display all of the desired
numbers in the input field.
Example: The screen for inputting numeric characters
123
Numeric
Edit
1 2 3 4 5 6 7 8 9 0
NOTE
• Press j (Del.Char.) to delete a number you
have input.
• To change a number you have input, press B (Green)
(Left) or C (Yellow) (Right) to select the number you want
to change, and press j (Del.Char.). Then,
press c/d to select a new number you want to input,
and press ENTER.
Input character list
Numeric
1 2 3 4 5 6 7 8 9 0
Edit
Cancel
The same operation as the coloured buttons and j can be performed by
selecting each of the items and pressing ENTER.
"Del.Char." stands for deleting characters.
5
Press D (Blue) (Complete) to fix the numbers
which have been input.
IP Address 123
Netmask
Gateway
6
Repeat step 1 to 5 to finish inputting all the
required characters.
Left Right Complete Del.Char.