TABLE OF CONTENTS 1. INTRODUCTION ..................4 1.1 Preface ......................4 1.2 Packing List ..................... 5 1.3 Cautions ......................5 1.4 Connection ....................... 6 1.5 Power On / Off ....................12 1.6 Menu Language ..................... 12 1.7 HDD Format ....................12 2.1 Remote Control ....................
INTRODUCTION 1.1 Preface Congratulations on your purchase of UEBO M200 Media Player. We hope you will enjoy using it as much as we did designing it. M200 Media Player Has the Following Functionalities: A/V Output • HDMI V1.3 for high-definition video and digital audio.
The actual contents of your package may be different from the packing list included in this manual. 1.3 Cautions In order to ensure both your safety and the proper operation of the M200 Media Player, please note the following before operating the Player: 1.3.1 Proper Usage 1.
1.3.5 Disposing off the Player UEBO strongly encourages recycling of this Player if and when you decide to dispose of it. Since each city has different regulations with respect to recycling, please consult your local recycling information center for advice on proper methods of disposal.
Page 7
1.4.2 Connecting to a PC In order to access the contents of the internal hard disk (purchased separately): Make sure the Player’s power is on. Plug in the square connector of the USB cable to the Player’s USB PLAYER port. Plug the rectangular connector of the USB cable into the computer.
Page 8
1.4.4 Connecting the Memory Card The Player has a built-in memory card slot, which enables you to view the contents of the memory card. To do this, please follow these instructions: Insert the memory card into the memory card slot on the Player’s side. Make sure to properly orient the memory card before insertion.
Page 9
Plug the other end of the composite cable into your TV’s A/V IN jack. Changing the input on the TV to the jack you used in step 2. 1.4.5.2 Y/Pb/Pr Component OUT Plug the component cable (3 colors – Yellow, Blue and Red) into the Player’s Y/Pb/Pr jack.
Page 10
1.4.5.3 HDMI OUT Plug one connector from your HDMI cable to the Player’s HDMI jack. Plug the other connector from your HDMI cable into the TV’s HDMI jack. IMPORTANT: The HDMI cable is an optional accessory and is sold separately. 1.4.6 Connecting to a Digital Amplifier To enjoy special sound processing by Dolby Digital, DTS, or MPEG (Please refer to “3.1 Changing Audio Settings”...
Page 11
1.4.8 Connecting to a WLAN To connect to the Wireless LAN, you will need a compliant 802.11G or 802.11n USB Wireless Adapter from UEBO. This USB Wireless Adapter is an optional item you can purchase separately by going to the http://www.uebo.net...
1.5 Power On / Off Power On After connecting the DC IN jack, press the power button on the front panel; the Player will boot up and enter the home screen, then the power indicator will turn blue. Power Off Press the power button on the front panel;...
Page 13
NOTE: This page can be also accessed via the Setup->System->HDD Format menu. Step 2: Select Format, press ENTER and then the hard disk formatting process will begin. IMPORTANT: Please make sure that the hard disk does not contain any important data as all files will be erased.
2. PLAYER INFORMATION 2.1 Remote Control All instructions in this manual can be carried out using the Remote Control buttons. Below is a list of the Player’s buttons and their functions: 1. STANDBY 2. MUTE 3. TV SYSTEM 4. BROWSER 5.
Page 15
BROWSER Press to enter the Media Browser menu. NUMERIC Press to enter numeric input when changing settings. BUTTONS REPEAT Press to set repeat option: One, All and Shuffle. Press to fast rewind the current playback; press repeatedly to select speeds. VOL- Press to decrease volume.
playback. SETUP Press to enter the Setup menu. RETURN Press to return to the previous screen while navigating menus. STOP Press to stop playback. NEXT Press to view the next file / page down. VOL+ Press to increase the volume. PREV Press to view the previous file / page up.
2.3 Rear View 1. S/PDIF OPTICAL jack (TOSLink) 2. S/PDIF COAXIAL jack 3. RJ45 LAN socket 4. HDMI jack 5. A/V OUT jack 6. Y/Pb/Pr OUT jack 7. DC IN jack 2.4 Side View 1. Memory Card slot 2. USB HOST port (A-Type) x 2 3.
3. SETUP MENU The Setup menu allows you to personalize and configure your preferences. To select a Setup option: 1 Select the Setup icon on the home screen, or press the SETUP button on the remote control. 2 Use the LEFT/RIGHT Navigational Buttons to select an option and then press ENTER. There are five (5) Setup options, including Audio, Video, Network, System and MISC.
Digital Output Choose between HDMI LPCM / HDMI RAW / SPDIF LPCM / SPDIF RAW. In HDMI RAW or SPDIF RAW mode, Dolby Digital, DTS or MPEG sound will be passed on to the HDMI TV or Amplifier for processing. 3.2 Changing Video Settings Use this menu to configure video settings.
60HZ / 1080I 50HZ / 1080I 60HZ / 1080P 50HZ / 1080P 60HZ/HDMI Auto. 1080P 24FPS • Choose this option to enable or disable 1080P 24HZ support. IMPORTANT: A TV set with 1080P 24HZ (24P) mode is required. Screen Size •...
Page 21
This Player can store up to three (3) wireless network connections. Press ENTER to go to the next step, press RETURN to cancel and press PLAY to connect. • Get Connection Mode Choose between Infrastructure (AP) and Peer-to-Peer (Ad Hoc). Press ENTER to go to the next step and press RETURN to cancel.
Page 22
Select the SSID that is associated with your Wireless Router or Access Point. Press ENTER to go to next step, press RETURN to cancel, or press SELECT to refresh the SSID list. IMPORTANT: On the Security list, WEP (Wired Equivalent Privacy) and WPA (Wi-Fi Protected Access) mean that the network is encrypted, i.e.
Page 23
The testing process will take a while, so please be patient. If the test results are OK, the network information (Profile Name, IP address, Subnet Mask, Gateway, etc.) will be displayed on the screen. • The Peer-to-Peer (Or Ad Hoc) Mode The Peer-to-Peer mode (also called the Ad-Hoc mode or computer-to-computer mode) is used to directly connect wireless clients together without the need for a wireless router or access point.
Page 24
First press the WPS button on the router, or select the button mode in the configuration menu of the router, then select the PBC mode: The connection process could take a while, so please be patient. If you prefer the PIN (pin code) option, enter the PIN code provided by your Player into the Wireless Router or Access Point.
BitTorrent and SAMBA • Here you turn ON/OFF BitTorrent download and NAS (Network Attached Storage) services. In order to use BitTorrent protocol to download content from Internet, or to use the hard disk drive in the Player as the shared media storage, you will need to set this to 3.4 Changing System Settings Use this menu to configure system settings.
2) Press ENTER to confirm. HDD Format • Select in order to format the built-in HDD. IMPORTANT: Formatting the hard disk drive might result in the loss of data, please proceed with caution. System Info • Select if you wish to view system information (firmware version, HDD info, MAC address, etc.) Restore Default •...
Movie Preview • Select if you wish to turn the movie preview On/Off in the browser menu. Please note that if you are using PlayOn TV service, it is advised that you turn this setting to Off to allow for smoother browsing experience.
CONFIRM Add the selected files to the playlist. RETURN Return to the previous menu. 4.1 Browsing All In this mode, all folders and supported contents (music, photos and movies) will be displayed. IMPORTANT • Please refer to the section entitled “9.1 Specifications” for more about the supported content formats.
4.3 Browsing Photos In this mode, all folders and supported image files in the current directory will be displayed. The following buttons can be used to control music playback: Button Function PLAY Begin playback. PREV / NEXT View the previous or next photo. LEFT / RIGHT Rotate a photo from any angle.
frame. SLOW Play video in slow motion; press repeatedly to select the speed. FR / FF Fast rewind or fast forward; press repeatedly to select the speed. PREV / NEXT View the previous or next movie. REPEAT Set repeat options: Title, Chapter and All. ZOOM IN / OUT Zoom into / out from the image.
Page 31
IMPORTANT: • While browsing high definition video files (resolution up to 720p / 1080i / 1080p) via Ethernet or WLAN, the video may be buffering, which is to be expected, due to limitations in network speed or signal strength. • As a result of different network conditions, the Workgroup might not be accessible or displayed on the list.
• Select the shortcut you added and press the ENTER button to confirm. Then you can select and play the shared media files on the destination computer. 4.6 A/V Streaming via UPnP-server An UPnP/DLNA (Universal Plug and Play/Digital Living Network Alliance) client has been integrated into the system, which enables the Player to automatically detect UPnP/DLNA Media Servers on the network.
Page 33
computer to enable viewing of streaming contents. In the following sections, we will use Windows Media Player 11 DLNA Server on Microsoft Windows XP SP2 and PlayOn TV as examples. 4.6.2 Setting Up Windows Media Player DLNA Server The Media Sharing feature of Windows Media Player 11 lets you enjoy the contents of your Windows Media Player library from anywhere in your home.
Page 34
PlayOn is simple to install and easy to get running and start using. 1) Download and install PlayOn on your Windows PC from www.playon.tv. 2) Turn on your M200 Media Player, find the PlayOn server under Media Browser, UPnP, and watch online content directly on your television.
Page 35
You can find the PlayOn Media Server(s) by searching under Media Browser, UPnP. Make sure M200 Player is connected to the same LAN segment as your PlayOn.TV server and that the network function is working properly. PlayOn Settings A number of options can be configured in PlayOn Settings. Also, PlayOn Settings is a good place to start looking for help when you are experiencing technical problems.
Page 36
quality of the videos that are pulled in from the Internet, but will tax your computer and network more. It is recommended that you use the “Auto” setting, as this allows PlayOn to determine which quality setting works best for your setup. If the automatic setting still doesn’t work, try “Low”...
Page 37
Broadband download speed In order to stream real-time videos from the Internet, your broadband connection speed must be consistently fast enough to maintain a stable download rate. The general rule of thumb is that if you can’t watch videos from sites like YouTube, Hulu, and Netflix directly in your PC browser without seeing a lot of buffering, then it definitely won’t work in PlayOn either.
Page 38
www.amazon.com/videoondemand. Hulu Account Queue You can access your Hulu account “Queue” videos from your PlayOn device. To do so, provide your Hulu login credentials in the provided fields, and then press the “Test” button to confirm you have entered the information correctly. Note that you will need to add videos to your Hulu Queue at http://www.hulu.com/profile/queue from your PC web browser for the videos to then...
• Visit Media Browser - > UPnP menu on the Player, select the UPnP-server and press ENTER. • Then you can browse the media library shared by Windows Media Player 11 or PlayOn TV Server. IMPORTANT: • Make sure your Player and your computer share the same local area network and subnet. •...
Press the UP / DOWN buttons to choose Return, Rename or Delete; then press ENTER to confirm. 4.8 Managing the Playlist This Player supports the playlist function, which allows you to add your favorite contents (All, Music, Photos and Movies), from local HDD to the playlist and enjoy them at any time. 4.8.1 Adding files to the Playlist Decide on the file you wish to add, press the SELECT button, then press the CONFIRM button;...
4.8.2 Browsing the Playlist Press the UP / DOWN buttons to select Playlist in the browser menu. Press the LEFT / RIGHT buttons to select between All, Music, Photos and Movies. Then press the ENTER button to confirm; you will then enter the playlist. If you wish to delete a file from the Playlist, press the SELECT button, and then press the CONFIRM button.
The following buttons can be used under the File Copy menu: Button Function UP / DOWN Move cursor up / down to select the source/destination folders. RIGHT To go to the next step. SELECT Select (or cancel) folders or files (the selected items will be ticked). STOP Cancel all selections.
6.1 Music library Use the left / right button on the remote control to select the Music tab. Press the Up / Down button to select from Update, Search, All, Artist, Genre and Album. Then press the ENTER button to confirm. Select to update and synchronize all the music stored on the internal Update HDD to the library.
Page 44
Press the Up / Down button to select the artist, then press the ENTER button to confirm. Genre Select to search for music files by genre. Press the Up / Down button to select the genre, then press the ENTER button to confirm.
Press the Up / Down button to select characters on the Quick-Search bar, then press the ENTER button to confirm. And then music files with names of the specific characters will be displayed at the top. Press the Left button to delete characters and press the Back button to close the Quick-Search bar.
Page 46
Use the Navigational buttons to select and press the Enter button to confirm. Then select OK, press the ENTER button; the files you desired will be displayed on the screen. Select to list all the photos in the library. Date Select to search for photos by date.
Press the Up / Down button to select characters on the Quick-Search bar and press the ENTER button to confirm; then photos with names of the specific characters will be displayed at the top. Press the Left button to delete characters and the back button to close the Quick-Search bar. 6.3 Movie Library Use the Left /Right button on the remote control to select the Movies tab.
Page 48
Use the Navigational buttons to select and the ENTER button to confirm. Select OK and press the ENTER button; the files you have chosen will be displayed on the screen. Select to list all the movies in the library. Actor Press the Up/Down button to select the actor, then press the ENTER button to confirm.
Press the Up / Down button to select the genre, then press the ENTER button to confirm. Year Select to search for movies by year. Press the Up / Down button to select the year, then press the ENTER button to confirm. Quick-Search You can also press the Right button to turn on the Quick-Search bar while previewing movies in the library.
Page 50
IMPORTANT: • Make sure the Player is properly connected to a LAN or WLAN with Internet access; (please refer to Section 3.3, “Changing Network Settings” for more details). When you enter the Internet Radio menu for the first time, it will take several seconds to •...
Page 51
Favorite • You can list your favorite stations in this menu. Search • You can locate stations in this menu by using key words. 51 / 68...
8. BITTORRENT, NAS & WEB SERVER FUNCTION In order to use this function, please make sure you have enabled the BitTorrent and SAMBA options in Setup -> Network (see Section 3.3). Select the BitTorrent icon from the main menu. In this menu, you will be able to see the status of the Torrents download or configure BT download settings.
8.2 Download Menu After adding the BT torrent files, the download progress can be observed in this menu. You can also set the priority of the download in this menu by pressing the MENU button on the remote control. The following buttons can be found on this menu: Button Function UP / DOWN...
In the BT Setup menu, you can configure the following settings. Use UP/DOWN and ENTER to change the settings. Set the maximum download rate. • • Set the maximum upload rate. • Set the idle hours to start the next download automatically. •...
Page 55
IMPORTANT: Please refer to Extension Info in Section 3.4, “Changing System Settings” to make sure that all related packages, btpd, samba and unicgi are installed and running properly. 8.4.1 Account Management 1. Click Account Management on the home page of Neighbor Web. 2.
Page 56
8.4.3 BitTorrent Download (btpd) BitTorrent is a peer-to-peer file sharing protocol used for distributing large amounts of data on the Internet. A BitTorrent utility (btpd – BitTorrent Protocol Daemon) has been integrated into the Player to allow BitTorrent control from the web browser. The BitTorrent client, btpd, is running in daemon mode (a process operating in the background), which you can manipulate via the Web server.
Page 57
set priorities for torrents and view the status of current torrents. 1. Click Start to begin download. 2. Click Stop to stop download. 3. Click Delete to delete the selected torrent. 4. Click Refresh to refresh the current status. 5. Click the Down arrow to reduce the priority of the selected torrent. 6.
5. Set to delete the finished torrent files automatically, if you wish. 6. Set the maximum number of simultaneous download tasks. 8.5 NAS Function (SAMBA) This Player can be used as a NAS (Network-Attached Storage) Server if connected to the home network via either Ethernet or WLAN.
IMS and will not be held responsible for the contents provided there, nor does UEBO endorse any contents provided by 3 parties. Viewer discretion is advised. UEBO is not responsible for any operational stability of the contents due to changes made by the content providers.
To upgrade the firmware, please follow these steps: Download the firmware from the UEBO support site on http://www.uebo.net. Make sure the firmware version you are downloading is newer than the version currently installed on the Player. You can check the version number by going to Setup->System->System Info on the player.
11. APPENDIXES 11.1 Specifications I/O INTERFACES SUPORTED: Internal 3.5” SATA I/II HDD USB 2.0 HOST port x 2 (compatible with USB 1.1) USB 2.0 DEVICE port (compatible with USB 1.1. For connecting to PC) Memory Card slot (supports SD/SDHC/MMC/MS/MS Pro) ...
notice. 11.2 Frequently Asked Questions (FAQ) Question 1: When I try to disconnect the USB Player, I keep on getting “The Player ‘generic volume’ cannot be stopped right now. Try stopping the Player later,” message. What should I do? Answer: Close any program that might be accessing data on the Player, including Windows® Explorer.
Page 63
Answer: When the USB Wireless Adapter is connected to the Player, it needs some time to initialize. Please wait about 1~2 minutes and then try refreshing the SSID list again. Question 8: I cannot see the files shared on my computer via Browser->Network menu. Answer: Please check the following items: 1) Connect the Player to network and obtain an IP address first;...
Trademarks UEBO, UITStor, UIT are trademarks of UITStor USA, Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks are property of their respective holders.
This Limited Warranty applies only to hardware products manufactured by or for UIT that can be identified by the "UEBO" trademark, trade name, or logo affixed to them. The Limited Warranty does not apply to any non-UIT hardware products or any software, even if packaged or sold with UIT hardware.
Page 66
damage caused by accident, abuse, misuse, flood, fire, earthquake or other external causes; (c) to damage caused by operating the product outside the permitted or intended uses described by UIT; (d) to damage caused by service (including upgrades and expansions) performed by anyone who is not a representative of UIT;...
Page 67
COUNTRY OF RESIDENCE, THE BENEFITS CONFERRED BY THIS WARRANTY ARE IN ADDITION TO ALL RIGHTS AND REMEDIES CONVEYED BY SUCH CONSUMER PROTECTION LAWS AND REGULATIONS. Some countries, states and provinces do not allow the exclusion or limitation of incidental or consequential damages or exclusions or limitations on the duration of implied warranties or conditions, so the above limitations or exclusions may not apply to you.
11.5 GPL Statement This product contains free software which is licensed under the GNU General Public License. After you purchase this product, you may procure, modify or distribute the source code of the GPL/LGPL software that is used in this product. To obtain a copy of our open source software, please contact our support center and we will provide you with a CD-ROM of the source code that is used, charging only the actual expense involved.