QuickStart Setup Guide
Indoor
Your WiLife Video Security System can manage up to six cameras,
giving you more power, ease, and extensibility for a reliable home
security system.
helps you add your new camera
to the WiLife Video Security System. Simply follow the
instructions and you will be viewing live video from your new
camera in minutes.
Run Command Center
Command
Center
Have the WiLife Command Center running on your PC.
Caution:
Legal Warning
Logitech digital video security camera products are intended to be used in a lawful
manner. Please note that certain uses of security camera products are prohibited or
severely restricted by national, state and local laws, such as employee monitoring,
surreptitious viewing and recording of images or sound, or the use, publication or
distribution of image and sound recordings. Before using Logitech digital video security
camera products you should become familiar with all applicable laws in your country. If
you have any concern about certain uses of our products, kindly consult local authorities
or local legal counsel.
Add-On Kit Components
Add-on Indoor Camera
Connect the Power Supply
Plug the Ethernet cable into the camera and into the power supply.
System Requirements
Mount the Camera
WiLife Command Center, you will
need to complete these tasks:
Command Center,
Additional Mounting Instructions
titled "WiLife Accessories. "
The WiLife Video Security System uses your Windows PC to record the
video from your cameras and serve video to your remote devices. You
need to have your PC on and running for the Wilife system to operate.
Adjusting the Focus
software.
Build a Complete Surveillance System
Add-on Indoor Camera
Add-on Outdoor Camera
Add-on Spy Camera
The WiLife Video Security System is available online at www.wilife.com
and at other select retail stores and authorized resellers. Visit
www.wilife.com to nd a store or reseller near you.
620-001004 rev 004