The Confi Guration Program - Introduction And Operation - Hama 62769 Operating Instructions Manual

If no connection is displayed, or if you want comprehensive instructions, please read on under "The confi gu-
ration program – introduction and operation".
3. The confi guration program – introduction and operation
Open the wireless LAN confi guration utility by clicking the Atheros Client Utility link on the Desktop or under
Start/Programs/Atheros/Atheros Client Utility.
All profi les saved are shown in the window at the top left. Initially, only the standard profi le is saved here.
Details on the selected profi le are displayed in this list. The right part of the window there are various buttons
for editing profi les.
The Order profi les button allows you to add created profi les to a list of Auto selected profi les.
This view gives you information on various settings of your
wireless LAN. If the target network to be connected is not
encrypted, the WLAN device may already have automati-
cally connected to an available network. If this is the case,
the signal strength display at the bottom of the screen
shows a signal.
Change to the Profi le management tab.
When confi guring it is useful to create a profi le. A profi le
serves to save various settings for a connection under
a certain name. For example, if you want to connect to
various wireless networks, you can save the settings for
the networks in profi les, which allows you to change the
confi guration quickly.
Select the required profi le in the list of the Available pro-
fi les. Click Add. The profi le select is then displayed in the
list of Auto selected profi les. That means that this profi le is
run automatically, e.g. after a restart. If there is more than
one profi le in this list, you can set the required sequence
with the Move up and Move down buttons. The Remove
button allows you to delete a profi le from the list.
Click OK to complete the confi guration.
18